{"title":"Align T-Rex 150 Spares","description":"","products":[{"product_id":"align-150grsa-flybarless-system-a-bus-t-rex-150-heg15006t","title":"Align 150GRSA Flybarless System (A.BUS) - T-Rex 150 : HEG15006T","description":"\u003cp\u003eUse for T-REX 150\/150X.\u003c\/p\u003e\u003cp\u003e6-axis Gyro: 3-axis gyroscope + 3-axis accelerometer using a superior ARM Cortex-M4 32-bits processor. 3D feeling is superior while auto-level ability is also agile and stable.\u003c\/p\u003e\u003cp\u003eAttitude Auto-level Mode: While there is no stick input for helicopter, the heli will auto-level and still keep at horizontal position, which is suitable for beginners.\u003c\/p\u003e\u003cp\u003eRescue Mode: While wrong stick input is given or heli is in trouble, or you are in panic, activate the rescue mode by flipping a switch on the radio to keep helis at a level position.\u003c\/p\u003e\u003cp\u003e3D Flying: Brand new DFCS(Direct Flight Control System)Contorller allows to control real time flight. Strong Cortex-M4 Processor allows T-REX 150 to fly just like big scale helicopters.\u003c\/p\u003e\u003cp\u003eBuilt-in Receiver: ALIGN A.BUS.\u003c\/p\u003e\u003cp\u003ePlug-in Receiver(Required): Compatible with Spektrum DSM2\/DSMX, JR DSM2\/DMSS satellite\u003c\/p\u003e\u003cp\u003eMust use with 150X Brushless ESC(HEG15003)\u003c\/p\u003e\u003cp\u003eSpecification:\u003c\/p\u003e\u003cp\u003eOperating voltage range:5V-8.4V\u003c\/p\u003e\u003cp\u003eOperating current consumption: \u0026lt;100mA @ 5V\u003c\/p\u003e\u003cp\u003eRotational detection rate: 2000°\/sec\u003c\/p\u003e\u003cp\u003eRudder yaw detection rate: 2000°\/sec\u003c\/p\u003e\u003cp\u003eSensor resolution:16BIT\u003c\/p\u003e\u003cp\u003eOperating temperature:-20? ~ 65?\u003c\/p\u003e\u003cp\u003eOperating humidity:0% ~ 95%\u003c\/p\u003e\u003cp\u003eSwashplate Support : MODE H-1\u003c\/p\u003e\u003cp\u003eReceiver Support : ALIGN A.BUS \/ DSM2 \/ DSMX \/ DMSS\u003c\/p\u003e\u003cp\u003eTransmit Distance: In open space without interference \u0026lt;150M\u003c\/p\u003e\u003cp\u003eAccessories:\u003c\/p\u003e\u003cp\u003e150 Main Control Board x 1\u003c\/p\u003e\u003cp\u003eA.BUS Receiver x 1\u003c\/p\u003e\u003cp\u003e(Without ESC)\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328232726728,"sku":"HEG15006T","price":39.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HEG15006T.jpg?v=1771942256"},{"product_id":"align-mini-a-bus-receiver-heg00003t-heg00003t","title":"Align Mini A.BUS Receiver : HEG00003T","description":"\u003cp\u003eUse for A10 Transmitter. Supplied standard in the T-Rex 300 RTF\u003c\/p\u003e\u003cp\u003eChannel: 14 channels\u003c\/p\u003e\u003cp\u003eRX Sensitivity: -105dBm\u003c\/p\u003e\u003cp\u003eRF Range: 2.4055 ~ 2.475 GHz\u003c\/p\u003e\u003cp\u003eSystem Mode: 2.4G system AFHDS 2A\u003c\/p\u003e\u003cp\u003ePower: 4.0 ~ 8.4V\u003c\/p\u003e\u003cp\u003eTransmit Distance: In the air without interference \u0026lt;150M\u003c\/p\u003e\u003cp\u003eDimension: 20x15.2x5.3mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAccessories\u003c\/strong\u003e:\u003c\/p\u003e\u003cp\u003eMini A.BUS Receiver x 1\u003c\/p\u003e\u003cp\u003eReceiver Bind Plug x 1\u003c\/p\u003e\u003cp\u003eDouble Sided Tape x 1\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328232530120,"sku":"HEG00003T","price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HEG00003T.jpg?v=1771943625"},{"product_id":"align-t-rex-150x-main-frame-set","title":"Align T-Rex 150X Main Frame Set : H15B001AXT","description":"\u003cp\u003eUse for T-REX 150\/150X.\u003c\/p\u003e\u003cp\u003e150 Main Frame x 1\u003c\/p\u003e\u003cp\u003e150 Servo upper case x 1\u003c\/p\u003e\u003cp\u003eBearing H63 x 2(F3xF6x2mm)\u003c\/p\u003e\u003cp\u003e150 Receiver mount x 1\u003c\/p\u003e\u003cp\u003eCross screw x 2(T1.5x4mm)\u003c\/p\u003e\u003cp\u003eSocket button head self tapping screw x 1(T1.5x4mm)\u003c\/p\u003e\u003cp\u003eSocket button head self tapping screw x 1(T1.5x3mm)\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328168206536,"sku":"H15B001AXT","price":13.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15B001XXT.jpg?v=1772022447"},{"product_id":"align-t-rex-150-main-frame-set","title":"Align T-Rex 150 Main Frame Set : H15B001XXT","description":"\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003e150 Main Frame x 1\u003c\/p\u003e\u003cp\u003e150 Servo upper case x 1\u003c\/p\u003e\u003cp\u003eBearing H63 x 2(F3xF6x2mm)\u003c\/p\u003e\u003cp\u003e150 Receiver mount x 1\u003c\/p\u003e\u003cp\u003eCross screw x 2(T1.5x4mm)\u003c\/p\u003e\u003cp\u003eSocket button head self tapping screw x 1(T1.5x4mm)\u003c\/p\u003e\u003cp\u003eSocket button head self tapping screw x 1(T1.5x3mm)\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328168239304,"sku":"H15B001XXT","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15B001XXT.jpg?v=1772022447"},{"product_id":"align-t-rex-150-landing-skid-black-2","title":"Align T-Rex 150 Landing Skid Black (2) : H15F001XAT","description":"\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003eLanding Skid x 2\u003c\/p\u003e\u003cp\u003eLanding Skid nut x 8(F1.5xF3.5x3.5mm)\u003c\/p\u003e\u003cp\u003eSocket button head self tapping screw x 4(T1.5x3mm)\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328168272072,"sku":"H15F001XAT","price":8.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15F001XAT.jpg?v=1772031311"},{"product_id":"align-t-rex-150-landing-skid-yellow","title":"Align T-Rex 150 Landing Skid- Yellow : H15F001XET","description":"\u003cp\u003eSuitable for T-REX 150.\u003c\/p\u003e\u003cp\u003eLanding Skid Yellow x 2\u003c\/p\u003e\u003cp\u003eLanding Skid nut x 8(F1.5xF3.5x3.5mm)\u003c\/p\u003e\u003cp\u003eSocket button head self tapping screw x 4(T1.5x3mm)\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328168304840,"sku":"H15F001XET","price":8.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15F001XET.jpg?v=1771951354"},{"product_id":"align-t-rex-150-landing-skid-orange","title":"Align T-Rex 150 Landing Skid- Orange : H15F001XOT","description":"\u003cp\u003eSuitable for T-REX 150.\u003c\/p\u003e\u003cp\u003eLanding Skid Orange x 2\u003c\/p\u003e\u003cp\u003eLanding Skid nut x 8(F1.5xF3.5x3.5mm)\u003c\/p\u003e\u003cp\u003eSocket button head self tapping screw x 4(T1.5x3mm)\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328168337608,"sku":"H15F001XOT","price":8.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15F001XOT.jpg?v=1772021821"},{"product_id":"align-t-rex-150-landing-skid-green-2","title":"Align T-Rex 150 Landing Skid-Green (2) : H15F001XST","description":"\u003cp\u003eSuitable for T-REX 150.\u003c\/p\u003e\u003cp\u003eLanding Skid-Green x 2\u003c\/p\u003e\u003cp\u003eLanding Skid nut x 8(F1.5xF3.5x3.5mm)\u003c\/p\u003e\u003cp\u003eSocket button head self tapping screw x 4(T1.5x3mm)\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328168370376,"sku":"H15F001XST","price":8.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15F001XST.jpg?v=1772031641"},{"product_id":"align-t-rex-150-landing-skid-2","title":"Align T-Rex 150 Landing Skid (2) : H15F001XXT","description":"\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003eLanding Skid x 2\u003c\/p\u003e\u003cp\u003eLanding Skid nut x 8(F1.5xF3x2mm)\u003c\/p\u003e\u003cp\u003eSocket button head self tapping screw x 4(T1.5x3mm)\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328168435912,"sku":"H15F001XXT","price":8.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15F001XXT.jpg?v=1771865124"},{"product_id":"align-t-rex-100-150-78t-main-drive-gear-2","title":"Align T-Rex 100\/150 78T Main Drive Gear (2) : H15G001XXT","description":"\u003cp\u003eUse for T-REX 100S\/100X\/150.\u003c\/p\u003e\u003cp\u003eBrand new design of 78T main gear for T-REX 150, features solid structure, it can be increase the gear torsion strength to avoid deform under high speed rotation.\u003c\/p\u003e\u003cp\u003eMain Drive Gear(78T) x 2\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328168534216,"sku":"H15G001XXT","price":7.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15G001XXT.jpg?v=1771599640"},{"product_id":"align-t-rex-150-main-rotor-housing","title":"Align T-Rex 150 Main Rotor Housing : H15H001AXT","description":"\u003cp\u003e6061-T6 Aluminum alloy material and CNC processed.\u003c\/p\u003e\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003eSpecification:\u003c\/p\u003e\u003cp\u003e150 Main Rotor Head Assembly × 1\u003c\/p\u003e\u003cp\u003eSocket button head collar screw × 1(#0-80x6.2mm)\u003c\/p\u003e\u003cp\u003eWasher × 2(F2xF3.6x0.2mm)\u003c\/p\u003e\u003cp\u003e150 Head Damper × 2(F2xF4x1.3mm)\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328168566984,"sku":"H15H001AXT","price":9.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15H001AXT.jpg?v=1771951225"},{"product_id":"align-t-rex-150-linkage-rod-set","title":"Align T-Rex 150 Linkage Rod Set : H15H003AXT","description":"\u003cp\u003eSuitable for T-REX 150.\u003c\/p\u003e\u003cp\u003e150 DFC Main rotor grip arm integrated control link x 4\u003c\/p\u003e\u003cp\u003e150 DFC Main rotor grip linkage bearing sleeve × 4\u003c\/p\u003e\u003cp\u003e100 Spacer × 4(F1.6x3.2x0.2mm)\u003c\/p\u003e\u003cp\u003eSocket Button Head Screw × 4(#0-80x8mm)\u003c\/p\u003e\u003cp\u003e150 Ball link A x 4\u003c\/p\u003e\u003cp\u003e150 Ball link B x 2\u003c\/p\u003e\u003cp\u003ef2.1 Linkage Ball A x 2(M1.2x1.3)\u003c\/p\u003e\u003cp\u003ef2.1 Linkage Ball A x 3(T1.2x2)\u003c\/p\u003e\u003cp\u003e150 Ball link B x 3(M1.2x1.6)\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328168665288,"sku":"H15H003AXT","price":8.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15H003AXT.jpg?v=1771608022"},{"product_id":"align-t-rex-150-feathering-shaft-3","title":"Align T-Rex 150 Feathering Shaft (3) : H15H004XXT","description":"\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003eStainless steel material. This high strength and high rigidity characteristics.\u003c\/p\u003e\u003cp\u003e150 Feathering shaft x 3(F2x16.5mm)\u003c\/p\u003e\u003cp\u003eSocket Button Head Screw x 6(#0-80x3mm)\u003c\/p\u003e\u003cp\u003e100 Spacer x 6(F1.6x3.2x0.2mm)\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328168698056,"sku":"H15H004XXT","price":6.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15H004XXT.jpg?v=1771863142"},{"product_id":"align-t-rex-150-swashplate","title":"Align T-Rex 150 Swashplate V2 : H15H005XXT","description":"\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003eSwashplate x 1\u003c\/p\u003e\u003cp\u003eF2.1 Linkage Ball A x 5(T1.2x2mm)\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328168730824,"sku":"H15H005XXT","price":9.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15H005XXT.jpg?v=1771944699"},{"product_id":"align-t-rex-150-main-blade-holder","title":"Align T-Rex 150 Main Blade Holder : H15H007XXT","description":"\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003eUltra-high hardness foam, high wear resistance, makes your blades more stable.\u003c\/p\u003e\u003cp\u003eMain blade holder x 1\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328168763592,"sku":"H15H007XXT","price":4.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15H007XXT.jpg?v=1771951041"},{"product_id":"align-t-rex-150-performance-booster","title":"Align T-Rex 150 Performance Booster : H15H008XXT","description":"\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003eFully CNC machined metal CCPM 150 swashplate features superior rigidity and zero slop, with bright red anodizing for added class to the Trex 150.\u003c\/p\u003e\u003cp\u003eNew reinforced 150 frame, featuring improved rigidity of the frame and landing skid mount, greatly minimized frame vibrations and dramatically improved flight performance.\u003c\/p\u003e\u003cp\u003e150 Metal Swashplate x 1\u003c\/p\u003e\u003cp\u003eF2.1 Linkage Ball A x 5(M1.2x1.3)\u003c\/p\u003e\u003cp\u003e150 Main Frame x 1\u003c\/p\u003e\u003cp\u003e150 Receiver Double sided tape x 1(26x18x2.5mm)\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328168829128,"sku":"H15H008XXT","price":20.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15H008XXT.jpg?v=1771950895"},{"product_id":"align-t-rex-150-swashplate-leveler","title":"Align T-Rex 150 Swashplate Leveler : H15H010XXT","description":"\u003cp\u003eUse for T-REX 150 all class machine and the T15\u003c\/p\u003e\u003cp\u003eSpecifically designed for 150 class helicopters, this swashplate leveler allows for precise swashplate level adjustment, improving helicopter hover stability and flight performance.\u003c\/p\u003e\u003cp\u003eTailored specifically for Align swashplate designs, utilizing CNC alloy metal for pleasing aesthetic and functionality.\u003c\/p\u003e\u003cp\u003eSwashplate unit corrector × 1\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328168927432,"sku":"H15H010XXT","price":6.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15H010XXT.jpg?v=1771864943"},{"product_id":"align-t-rex-150-head-damper","title":"Align T-Rex 150 Head Damper : H15H011XXT","description":"\u003cp\u003eUse for T-REX 150 DFC.\u003c\/p\u003e\u003cp\u003eIncludes:\u003c\/p\u003e\u003cp\u003eWasher x 2(F2xF3.6x0.2mm)\u003c\/p\u003e\u003cp\u003e150 Head Damper x 8(F2xF4x1.3mm)\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328168960200,"sku":"H15H011XXT","price":5.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15H011XXT.jpg?v=1771944439"},{"product_id":"align-t-rex-150-main-rotor-holder-upgrade-set","title":"Align T-Rex 150 Main Rotor Holder Upgrade Set : H15H013XXT","description":"\u003cp\u003eAlign T-Rex 150 Main Rotor Holder Upgrade Set : H15H013XXT\u003c\/p\u003e\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003e6061-T6 Aluminum alloy material and CNC processed.\u003c\/p\u003e\u003cp\u003eNew Main Rotor Holder effectively enhance flight stability in steady flight performance also reach the extreme control precision in 3D flight performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e150 Main Shaft x1 (F3x52.6mm)\u003c\/li\u003e\n\u003cli\u003e150 Main rotor holder x2 (16x13.2x6mm)\u003c\/li\u003e\n\u003cli\u003e681ZZ-d2 Bearing x4 (F2xF6x2.6mm)\u003c\/li\u003e\n\u003cli\u003eSocket Button Head Screw x1 (M2x4mm)\u003c\/li\u003e\n\u003cli\u003eSocket button head collar screw x2 (#0-80x6.2mm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328169025736,"sku":"H15H013XXT","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15H013XXT.jpg?v=1771941842"},{"product_id":"150-main-rotor-holder-align-t-rex-150-150x","title":"150 Main Rotor Holder - Align - T-Rex 150\/150X : H15H015XXT","description":"\u003cp\u003eUse for T-REX 150\/150X.\u003c\/p\u003e\u003cp\u003e6061-T6 Aluminum alloy material and CNC processed.\u003c\/p\u003e\u003cp\u003eMust use with 150 Main Shaft (H15H014XXT).\u003c\/p\u003e\u003cp\u003e150 Main rotor holder × 2\u003c\/p\u003e\u003cp\u003e681ZZ-d2 Bearing × 4(F2xF6x2.6mm)\u003c\/p\u003e\u003cp\u003eSocket button head collar screw × 2(#0-80x6.2mm)\u003c\/p\u003e\u003cp\u003eSocket Button Head Screw × 2(#0-80x8mm)\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328169091272,"sku":"H15H015XXT","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15H015XXT-1.jpg?v=1772021640"},{"product_id":"bearing-681zz-d2-align-t-rex-150-8","title":"Bearing (681ZZ-d2) - Align T-Rex 150 (8) : H15R001XXT","description":"\u003cp\u003eBearing (681ZZ-d2) - Align T-Rex 150 (8) : H15R001XXT\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUse for:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e150 Main Rotor Holder (H15H002XXT)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBearing 681ZZ-d2 x 8(F2xF4.5x2mm)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328169124040,"sku":"H15R001XXT","price":8.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15R001XXT.jpg?v=1771943453"},{"product_id":"align-t-rex-150-vertical-stabilizer-2","title":"Align T-Rex 150 Vertical Stabilizer (2) : H15T001XXT","description":"\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003eVertical Stabilizer x 2\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328169156808,"sku":"H15T001XXT","price":5.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15T001XXT.jpg?v=1771865826"},{"product_id":"align-t-rex-150-tail-boom-2","title":"Align T-Rex 150 Tail Boom (2) : H15T002XXT","description":"\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003e6061-T6 Aluminum alloy material.\u003c\/p\u003e\u003cp\u003e150 tail boom x 2(3.5x3.5x140mm)\u003c\/p\u003e\u003cp\u003e150 Tail motor mount x 2\u003c\/p\u003e\u003cp\u003eSocket button head self screw x 2(T1.5x3mm)\u003c\/p\u003e\u003cp\u003eSocket button head screw x 2(#0-80x3mm)\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328169287880,"sku":"H15T002XXT","price":6.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15T002XXT.jpg?v=1771948039"},{"product_id":"align-t-rex-150-metal-tail-motor-mount","title":"Align T-Rex 150 Metal Tail Motor Mount : H15T003XXT","description":"\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003eBrand new CNC metal tail motor mount which effectively increase torsion strength of tail motor mount, plus attractive machined aluminum electroplate red is absolutely best selection to upgrade for T-REX 150.\u003c\/p\u003e\u003cp\u003e150 Carbon Vertical Stabilizer x 1\u003c\/p\u003e\u003cp\u003e150 Metal Tail Motor Mount x 1 \u003c\/p\u003e\u003cp\u003e150 Mount fixing plate x 1\u003c\/p\u003e\u003cp\u003eSocket button head screw x 2(#0-80) x 2\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328169353416,"sku":"H15T003XXT","price":12.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15T003XXT.jpg?v=1771950700"},{"product_id":"align-t-rex-150-spare-parts-pack","title":"Align T-Rex 150 Spare Parts Pack : H15Z001XXT","description":"\u003cp\u003eAlign T-Rex 150 Spare Parts Pack includes:\u003c\/p\u003e\u003cp\u003eSocket button head screw x 5(#0-80x6.2mm)\u003c\/p\u003e\u003cp\u003eWasher x 4(F2xF3.6x0.2mm)\u003c\/p\u003e\u003cp\u003e150 Head Damper x 2(F2xF4x1.3mm)\u003c\/p\u003e\u003cp\u003eSocket Button Head Screw x 5(#0-80x3mm)\u003c\/p\u003e\u003cp\u003e100 Spacer x 4(F1.6xF3.2x0.2mm)\u003c\/p\u003e\u003cp\u003eSocket button head screw x 4(#0-80x8mm)\u003c\/p\u003e\u003cp\u003eF2.1 Linkage ball A x 5(F2.1x4.28mm)\u003c\/p\u003e\u003cp\u003eSocket button head screw x 2(M2x4mm)\u003c\/p\u003e\u003cp\u003eCross screw x 2(T1.5x4mm)\u003c\/p\u003e\u003cp\u003e150 Ball Link A x 2(F2.1x13.3x2mm)\u003c\/p\u003e\u003cp\u003e150 Ball Link B x 4(F2.1x10.5x2mm)\u003c\/p\u003e\u003cp\u003e150 Landing Skid Spacer x 4(F1.5xF3x2mm)\u003c\/p\u003e\u003cp\u003eSocket button head self tapping screw x 5(T1.5x3mm)\u003c\/p\u003e\u003cp\u003eSocket button head self tapping screw x 5(T1.5x4mm)\u003c\/p\u003e\u003cp\u003eMotor Pinion Gear 10T x 1\u003c\/p\u003e\u003cp\u003e100 Canopy nut x 4\u003c\/p\u003e\u003cp\u003eStrap x 5(1.6x71mm)\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328169386184,"sku":"H15Z001XXT","price":7.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15Z001XXT.jpg?v=1771941505"},{"product_id":"align-t-rex-150-carry-box-black","title":"Align T-Rex 150 Carry Box - Black : H15Z003XAT","description":"\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\n\u003cp\u003eBrand new 150 carry box is special design for T-REX 150 helicopter, features easy to carry and storage, this attractive small box can be storage a helicopter and its necessary flying parts which included 6 batteries, 3 hexagon screw drivers, 2 pair main blades, charger and a small parts box, you can easy and clear to know inside situation just need a glance at its transparence cover, time to arrange a wonderful carry box for your favorite 150 helicopter.\u003c\/p\u003e\n\u003cp\u003e150 Carry Box-Black x 1(292x160x69mm)\u003c\/p\u003e\n\u003cp\u003e1.3mm Hexagon screw driver(Blue\/8.2g) x 2\u003c\/p\u003e\n\u003cp\u003e0.9mm Hexagon screw driver(Red\/8g) x 1\u003c\/p\u003e\n\u003cp\u003eParts box x 1(78.5x60.9x21mm)\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15Z003XAT-MAIN.jpg?v=1658742332\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328169418952,"sku":"H15Z003XAT","price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15Z003XAT.jpg?v=1772031170"},{"product_id":"align-t-rex-150-carry-box-yellow","title":"Align T-Rex 150 Carry Box - Yellow : H15Z003XXT","description":"\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003eBrand new 150 carry box is special design for T-REX 150 helicopter, features easy to carry and storage, this attractive small box can be storage a helicopter and its necessary flying parts, just need a glance at its transparent cover then you can easily to check what inside the box, time to arrange a wonderful carry box for your favorite 150 helicopter.\u003c\/p\u003e\u003cp\u003e150 Carry Box-Yellow x 1(292x160x69mm)\u003c\/p\u003e\u003cp\u003e1.3mm Hexagon screw driver(Blue\/8.2g) x 2\u003c\/p\u003e\u003cp\u003e0.9mm Hexagon screw driver(Red\/8g) x 1\u003c\/p\u003e\u003cp\u003eParts box x 1(78.5x60.9x21mm)\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15Z003XAT-MAIN.jpg?v=1658742332\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328169451720,"sku":"H15Z003XXT","price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/H15Z003XXT.jpg?v=1772031005"},{"product_id":"align-t-rex-150-2s1p-7-4v-250mah-30c-2","title":"Align T-Rex 150 2S1P 7.4V 250mAh\/30C (2) : HBP02501T","description":"\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003eMax Continuous Discharge: 30C. Normal operating temperature is approx. 40-65°C(within 80% of rated discharge). Max. temperature: 80°C.\u003c\/p\u003e\u003cp\u003eRecommend to discharge the battery within 80% of rated discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.(The cycle life and efficiency will reduce due to high current, high temperature and over-discharge)\u003c\/p\u003e\u003cp\u003eSpecification\u003c\/p\u003e\u003cp\u003eOutput:7.4V250mAh (2S1P)\u003c\/p\u003e\u003cp\u003eDimension:47x21.5x12mm\u003c\/p\u003e\u003cp\u003eWeight:15g\u003c\/p\u003e\u003cp\u003eNOTE:\u003c\/p\u003e\u003cp\u003eWhen using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can't exceed 80% of the max capacity after full charging to ensure a good cycle performance.Recommend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.4V). Do not use the battery at insufficient of voltage.\u003c\/p\u003e\u003cp\u003eDo not expose batteries to sunshine or store\/ charge batteries at the temperature up to 35? in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.\u003c\/p\u003e\u003cp\u003eDo not leave the charger is operating unattended as it may cause a fire.\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328222437576,"sku":"HBP02501T","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HBP02501T.jpg?v=1771944325"},{"product_id":"align-2s1p-7-4v-300mah-30c-t-rex-150-2","title":"Align 2S1P 7.4V 300mAh\/30C - T-Rex 150 (2) : HBP03001T","description":"\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003eThis Li-poly battery is using series\/balancing design, features high efficient and high discharge.\u003c\/p\u003e\u003cp\u003eMax Continuous Discharge: 30C. Normal operating temperature is approx. 40-65°C(within 80% of rated discharge). Max. temperature: 80°C.\u003c\/p\u003e\u003cp\u003eRecommend to discharge the battery within 80% of rated discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.(The cycle life and efficiency will reduce due to high current, high temperature and over-discharge)\u003c\/p\u003e\u003cp\u003eOutput:7.4V 300mAh 2.22Wh(2S1P)\u003c\/p\u003e\u003cp\u003eDimension:54x21.5x12mm\u003c\/p\u003e\u003cp\u003eWeight:18g\u003c\/p\u003e\u003cp\u003eSupport 5C charging\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328222470344,"sku":"HBP03001T","price":16.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HBP03001T.jpg?v=1771607855"},{"product_id":"align-t-rex-150x-painted-canopy","title":"Align T-Rex 150X Painted Canopy : HC1515T","description":"\u003cp\u003eUse for T-REX 150\/150X.\u003c\/p\u003e\u003cp\u003e150X new oversize canopy keep T-REX 150X balance and coordination,also ultilize with PC material that is durable,anti-vibration and quiet.\u003c\/p\u003e\u003cp\u003e150X Painted Canopy x 1\u003c\/p\u003e\u003cp\u003eCanopy nut x 4\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328223551688,"sku":"HC1515T","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HC1515T-1.jpg?v=1771950486"},{"product_id":"align-t-rex-150-120-main-blades-black","title":"Align T-Rex 150 - 120 Main Blades-Black : HD123AT","description":"\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003eShape: Symmetrical wing\u003c\/p\u003e\u003cp\u003eLength: 120mm\u003c\/p\u003e\u003cp\u003eWeight: Approx 5.8g\/set\u003c\/p\u003e\u003cp\u003eSpecification:\u003c\/p\u003e\u003cp\u003eMain Blades x 2 set\u003c\/p\u003e\u003cp\u003eMain blade Decal x 1 set\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328227582152,"sku":"HD123AT","price":8.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HD123AT.jpg?v=1771943367"},{"product_id":"align-t-rex-150-120-main-blades-white","title":"Align T-Rex 150 - 120 Main Blades-White : HD123BT","description":"\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003eShape: Symmetrical Wing\u003c\/p\u003e\u003cp\u003eLength: 120mm\u003c\/p\u003e\u003cp\u003eWeight: Approx 7.2g\/set\u003c\/p\u003e\u003cp\u003eSpecification:\u003c\/p\u003e\u003cp\u003eMain Blades x 1 set\u003c\/p\u003e\u003cp\u003eMain Blade Decal x 1 set\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328227680456,"sku":"HD123BT","price":8.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HD123BT.jpg?v=1771949149"},{"product_id":"align-t-rex-150-120-main-blades-green","title":"Align T-Rex 150 - 120 Main Blades-Green : HD123CT","description":"\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003eShape: Symmetrical Wing\u003c\/p\u003e\u003cp\u003eLength: 120mm\u003c\/p\u003e\u003cp\u003eWeight: Approx 6 g\/set\u003c\/p\u003e\u003cp\u003eSpecification:\u003c\/p\u003e\u003cp\u003e120 Main Blades Green x 2 set\u003c\/p\u003e\u003cp\u003eMain Blade Decal x 1 set\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328227713224,"sku":"HD123CT","price":6.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HD123CT.jpg?v=1771944181"},{"product_id":"align-t-rex-150-120-main-blades-yellow","title":"Align T-Rex 150 120 Main Blades-Yellow : HD123DT","description":"\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003eShape: Symmetrical wing\u003c\/p\u003e\u003cp\u003eLength: 120 mm\u003c\/p\u003e\u003cp\u003eWeight: Approx 6 g\/set\u003c\/p\u003e\u003cp\u003eSpecification:\u003c\/p\u003e\u003cp\u003e120 Main Blades-Yellow x 2 set\u003c\/p\u003e\u003cp\u003eMain Blade Decal x 1 set\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328227745992,"sku":"HD123DT","price":6.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HD123DT.jpg?v=1771943989"},{"product_id":"align-120-main-blades-orange-hd123ebt","title":"Align 120 Main Blades - T-Rex 150X - Orange : HD123EBT","description":"\u003cp\u003eAlign 120 Main Blades - Orange : HD123EBT\u003c\/p\u003e\n\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShape: Symmetrical wing\u003c\/li\u003e\n\u003cli\u003eLength: 120mm\u003c\/li\u003e\n\u003cli\u003eWeight:Approx 6 g\/set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e120 Main Blades Orange x 2 set\u003c\/li\u003e\n\u003cli\u003eMain blade Decal x 1 set\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328227778760,"sku":"HD123ET","price":10.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/image475119810.jpg?v=1756827388"},{"product_id":"align-ch150-li-po-charger-t-rex-150","title":"Align CH150 Li-Po Charger - T-Rex 150 : HEC15001T","description":"\u003cp\u003e1.Voltage balancing charging suitable for 2S 7.4V.\u003c\/p\u003e\u003cp\u003e2.Suitable for DC 9V~12V power input.\u003c\/p\u003e\u003cp\u003e3.Auto-detected charge status display.\u003c\/p\u003e\u003cp\u003e4.Reverse polarity (warning beep) and short protection built in.\u003c\/p\u003e\u003cp\u003eNOTE:\u003c\/p\u003e\u003cp\u003e1.Do not leave the charger is operating unattended as it may cause a fire. \u003c\/p\u003e\u003cp\u003e2.If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.\u003c\/p\u003e\u003cp\u003eInput Voltage: DC 9V~12V\u003c\/p\u003e\u003cp\u003eOutput Voltage: 2S DC 7.4V\u003c\/p\u003e\u003cp\u003eSupported Battery Type: Li-polymer\u003c\/p\u003e\u003cp\u003eCharging Method: CC\/CV\u003c\/p\u003e\u003cp\u003eCharging Current: 0.5A\u003c\/p\u003e\u003cp\u003eSize: 69x41x21mmm\u003c\/p\u003e\u003cp\u003eWeight:Approx 33g\u003c\/p\u003e\u003cp\u003eAccessories:\u003c\/p\u003e\u003cp\u003eCH150 Li-po Charger x 1\u003c\/p\u003e\u003cp\u003ePower cord x 1\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328232038600,"sku":"HEC15001T","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HEC15001T-1.jpg?v=1772021318"},{"product_id":"align-ch150x-li-po-charger-twin-charger","title":"Align CH150X Li-Po Charger (Twin Charger) : HEC15002T","description":"\u003cp\u003e1. Suitable for DC 11V~19V power input.\u003c\/p\u003e\u003cp\u003e2. Apply to 2S Li-polymer batteries.\u003c\/p\u003e\u003cp\u003e3. Equipped dual output function, it allows two batteries charging with 1A current in the same time.\u003c\/p\u003e\u003cp\u003e4. Balance charging is good to prevent the situation of over-charging or under-charging for a single cell.\u003c\/p\u003e\u003cp\u003e5. Auto-detected charge status display. \u003c\/p\u003e\u003cp\u003e6. The auto-detected function of low voltage for power storage.\u003c\/p\u003e\u003cp\u003e7. Reverse polarity protection and short circuit protection.\u003c\/p\u003e\u003cp\u003eNOTE:\u003c\/p\u003e\u003cp\u003e1.Do not leave the charger is operating unattended as it may cause a fire.\u003c\/p\u003e\u003cp\u003e2.If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.\u003c\/p\u003e\u003cp\u003eSpecification:\u003c\/p\u003e\u003cp\u003eInput Voltage: DC 11V~19V\u003c\/p\u003e\u003cp\u003eOutput Voltage: 2S DC 7.4V\u003c\/p\u003e\u003cp\u003eInput current : Recommended 1.5A or more\u003c\/p\u003e\u003cp\u003eSupported Battery Type: Li-polymer\u003c\/p\u003e\u003cp\u003eCharging Method: CC\/CV\u003c\/p\u003e\u003cp\u003eCharging Current: 1A\u003c\/p\u003e\u003cp\u003eSize: 71x49.5x21mm\u003c\/p\u003e\u003cp\u003eWeight: Approx 42g\u003c\/p\u003e\u003cp\u003eAccessories:\u003c\/p\u003e\u003cp\u003eCH150X Li-po Charger x 1\u003c\/p\u003e\u003cp\u003ePower cord x 1\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328232071368,"sku":"HEC15002T","price":20.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HEC15002T-1.jpg?v=1771941235"},{"product_id":"align-150grs-flybarless-system-set-t-rex-150-150x","title":"Align 150GRS Flybarless System Set - T-Rex 150\/150X : HEG15004T","description":"\u003cp\u003eUse for T-REX 150\/150X.\u003c\/p\u003e\u003cp\u003e6-axis Gyro: 3-axis gyroscope + 3-axis accelerometer using a superior ARM Cortex-M4 32-bits processor. 3D feeling is superior while auto-level ability is also agile and stable.\u003c\/p\u003e\u003cp\u003eAttitude Auto-level Mode: While there is no stick input for helicopter, the heli will auto-level and still keep at horizontal position, which is suitable for beginners.\u003c\/p\u003e\u003cp\u003eRescue Mode: While wrong stick input is given or heli is in trouble, or you are in panic, activate the rescue mode by flipping a switch on the radio to keep helis at a level position.\u003c\/p\u003e\u003cp\u003e3D Flying:Brand new DFCS(Direct Flight Control System)Contorller allows to control real time flight. Strong Cortex-M4 Processor allows T-REX 150 to fly just like big scale helicopters.\u003c\/p\u003e\u003cp\u003eBuilt-in Receiver: Futaba S-FHSS 2.4GHz System.\u003c\/p\u003e\u003cp\u003ePlug-in Receiver(Required): Compatible with Spektrum DSM2\/DSMX, JR DSM2\/DMSS satellite.\u003c\/p\u003e\u003cp\u003e150GRS Flybarless System:\u003c\/p\u003e\u003cp\u003eOperating voltage range: 2S Li-Po\u003c\/p\u003e\u003cp\u003eOperating current consumption: \u0026lt;100mA @ 5V\u003c\/p\u003e\u003cp\u003eRotational detection rate: 2000°\/sec\u003c\/p\u003e\u003cp\u003eRudder yaw detection rate: 2000°\/sec\u003c\/p\u003e\u003cp\u003eSensor resolution:16BIT\u003c\/p\u003e\u003cp\u003eOperating temperature:-20? ~ 65?\u003c\/p\u003e\u003cp\u003eOperating humidity:0% ~ 95%\u003c\/p\u003e\u003cp\u003eSwashplate Support : MODE H-1\u003c\/p\u003e\u003cp\u003eReceiver Support : ALIGN \/ Futaba S-FHSS?DSM2 \/ DSMX \/ DMSS\u003c\/p\u003e\u003cp\u003e150X Brushless ESC:\u003c\/p\u003e\u003cp\u003eMain motor output current: Continuous 6A \/ Surge 7A\u003c\/p\u003e\u003cp\u003eTail motor output current: Continuous 3A \/ Surge 3.5A\u003c\/p\u003e\u003cp\u003eBEC output current: Continuous 5V\/2A \/ Surge 5V\/2A\u003c\/p\u003e\u003cp\u003ePersistent maximum current require optimal heat dissipation condition.\u003c\/p\u003e\u003cp\u003eSupported motor types: 2 poles to 18 poles brushless outrunners.\u003c\/p\u003e\u003cp\u003eMaximum rotational speed: 2 poles-240000 RPM, 12 poles-40000 RPM.\u003c\/p\u003e\u003cp\u003eInput voltage: 2S Li-Po.\u003c\/p\u003e\u003cp\u003eAccessories:\u003c\/p\u003e\u003cp\u003e150 Main Control Board x 1\u003c\/p\u003e\u003cp\u003e150 Receiver Board x 1\u003c\/p\u003e\u003cp\u003e7A Brushless ESC x 1\u003c\/p\u003e\u003cp\u003e150 GRS Double Sided Tape A x 1\u003c\/p\u003e\u003cp\u003e150 GRS Double Sided Tape B x 1\u003c\/p\u003e\u003cp\u003e150 Battery Socket x 1\u003c\/p\u003e\u003cp\u003e150 Battery Socket Mount x 1\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328232595656,"sku":"HEG15004T","price":57.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HEG15004T.jpg?v=1772030827"},{"product_id":"align-t-rex-150grsa-flybarless-system-set-a-bus","title":"Align T-Rex 150GRSA Flybarless System Set (A.BUS) : HEG15005T","description":"\u003cp\u003eUse for T-REX 150\/150X.\u003c\/p\u003e\u003cp\u003e6-axis Gyro: 3-axis gyroscope + 3-axis accelerometer using a superior ARM Cortex-M4 32-bits processor. 3D feeling is superior while auto-level ability is also agile and stable.\u003c\/p\u003e\u003cp\u003eAttitude Auto-level Mode: While there is no stick input for helicopter, the heli will auto-level and still keep at horizontal position, which is suitable for beginners.\u003c\/p\u003e\u003cp\u003eRescue Mode: While wrong stick input is given or heli is in trouble, or you are in panic, activate the rescue mode by flipping a switch on the radio to keep helis at a level position.\u003c\/p\u003e\u003cp\u003e3D Flying: Brand new DFCS(Direct Flight Control System)Contorller allows to control real time flight. Strong Cortex-M4 Processor allows T-REX 150 to fly just like big scale helicopters.\u003c\/p\u003e\u003cp\u003eBuilt-in Receiver: ALIGN A.BUS.\u003c\/p\u003e\u003cp\u003ePlug-in Receiver(Required): Compatible with Spektrum DSM2\/DSMX, JR DSM2\/DMSS satellite\u003c\/p\u003e\u003cp\u003eSpecification:\u003c\/p\u003e\u003cp\u003e150GRSA Flybarless System:\u003c\/p\u003e\u003cp\u003eOperating voltage range:5V-8.4V\u003c\/p\u003e\u003cp\u003eOperating current consumption: \u0026lt;100mA @ 5V\u003c\/p\u003e\u003cp\u003eRotational detection rate: 2000°\/sec\u003c\/p\u003e\u003cp\u003eRudder yaw detection rate: 2000°\/sec\u003c\/p\u003e\u003cp\u003eSensor resolution:16BIT\u003c\/p\u003e\u003cp\u003eOperating temperature:-20? ~ 65?\u003c\/p\u003e\u003cp\u003eOperating humidity:0% ~ 95%\u003c\/p\u003e\u003cp\u003eSwashplate Support : MODE H-1\u003c\/p\u003e\u003cp\u003eReceiver Support : ALIGN A.BUS \/ DSM2 \/ DSMX \/ DMSS\u003c\/p\u003e\u003cp\u003eTransmit Distance: In open space without interference \u0026lt;150M\u003c\/p\u003e\u003cp\u003e150X Brushless ESC:\u003c\/p\u003e\u003cp\u003eMain motor output current: Continuous 6A \/ Surge 7A\u003c\/p\u003e\u003cp\u003eTail motor output current: Continuous 3A \/ Surge 3.5A\u003c\/p\u003e\u003cp\u003eBEC output current: Continuous 5V\/2A \/ Surge 5V\/2.5A\u003c\/p\u003e\u003cp\u003ePersistent maximum current require optimal heat dissipation condition.\u003c\/p\u003e\u003cp\u003eSupported motor types: 2 poles to 18 poles brushless outrunners.\u003c\/p\u003e\u003cp\u003eMaximum rotational speed: 2 poles-240000 RPM, 12 poles-40000 RPM.\u003c\/p\u003e\u003cp\u003eInput voltage: 2S Li-Po.\u003c\/p\u003e\u003cp\u003eAccessories:\u003c\/p\u003e\u003cp\u003e150 Main Control Board x 1 \u003c\/p\u003e\u003cp\u003eA.BUS Receiver x 1\u003c\/p\u003e\u003cp\u003e7A Brushless ESC x 1\u003c\/p\u003e\u003cp\u003e150 GRS Double Sided Tape A x 1\u003c\/p\u003e\u003cp\u003e150 GRS Double Sided Tape B x 1\u003c\/p\u003e\u003cp\u003e150 Battery Socket x 1\u003c\/p\u003e\u003cp\u003e150 Battery Socket Mount x 1\u003c\/p\u003e\u003cp\u003eSided Tape A x 1 150 GRS Double Sided Tape B x 1 150 Battery Socket x 1 150 Battery Socket Mount x 1\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328232693960,"sku":"HEG15005T","price":59.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HEG15005T.jpg?v=1771865715"},{"product_id":"align-t-rex-150-receiver-double-sided-tape","title":"Align T-Rex 150 Receiver Double Sided Tape : HEP15002T","description":"\u003cp\u003eSuitable for the 150 MRS 3 in 1 Controller.\u003c\/p\u003e\u003cp\u003e150 Receiver Double sided tape x 4(26x18x2.5mm)\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328234037448,"sku":"HEP15002T","price":3.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HEP15002T.jpg?v=1771943209"},{"product_id":"align-t-rex-150-tail-motor-wire-set","title":"Align T-Rex 150 Tail Motor Wire Set : HEP15003T","description":"\u003cp\u003eAlign T-Rex 150 Tail Motor Wire Set\u003c\/p\u003e\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003eSpecification:\u003c\/p\u003e\u003cp\u003e150 Tail Motor Wire x 2\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328234070216,"sku":"HEP15003T","price":8.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HEP15003T.jpg?v=1771867605"},{"product_id":"align-t-rex-150grs-double-sided-tape","title":"Align T-Rex 150GRS Double Sided Tape : HEP15004T","description":"\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003e150GRS Double Sided Tape A × 2(26x18x1mm)\u003c\/p\u003e\u003cp\u003e150GRS Double Sided Tape B × 2(26x18x2mm)\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328234102984,"sku":"HEP15004T","price":6.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HEP15004T.jpg?v=1772030651"},{"product_id":"jr-dmss-satellite-for-align-t-rex-150","title":"JR DMSS Satellite for Align T-Rex 150 : HER15001T","description":"\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003eSuitable for JR latest DMSS 2.4GHZ system with fabulous fast transfer speeds, low operation delay, high noise immunity, features safety and reliability.\u003c\/p\u003e\u003cp\u003eJR DMSS 2.4GHz system\u003c\/p\u003e\u003cp\u003eDimension:6.3 x 24.6 x 21.7 mm\u003c\/p\u003e\u003cp\u003eWeight: 3g\u003c\/p\u003e\u003cp\u003eAccessories:\u003c\/p\u003e\u003cp\u003eRJ01 DMSS Remote Receiver x 1\u003c\/p\u003e\u003cp\u003eRemote extension x 1\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328235217096,"sku":"HER15001T","price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HER15001T.jpg?v=1771954103"},{"product_id":"align-t-rex-150mt-tail-motor-assembly-8000kv-1103","title":"Align T-Rex 150MT Tail Motor Assembly(8000KV\/1103) : HML15M02AT","description":"\u003cp\u003eUse for T-REX 150S\/X\u003c\/p\u003e\u003cp\u003eInput voltage: 2S\u003c\/p\u003e\u003cp\u003eKV value: 8000KV\u003c\/p\u003e\u003cp\u003eStator Dimension:1103\u003c\/p\u003e\u003cp\u003eStator Arms: 9\u003c\/p\u003e\u003cp\u003eMagnet Poles: 6\u003c\/p\u003e\u003cp\u003eDimension: 1.4x13.2x18.1mm\u003c\/p\u003e\u003cp\u003eWeight: 3.3g\u003c\/p\u003e\u003cp\u003eAccessories:\u003c\/p\u003e\u003cp\u003e150M Tail Motor x 1\u003c\/p\u003e\u003cp\u003e150 Tail Motor Mount x 1\u003c\/p\u003e\u003cp\u003e150 Motor Wire Socket x 1\u003c\/p\u003e\u003cp\u003eStrap x 2(1.6x71mm)\u003c\/p\u003e\u003cp\u003eSocket Button Head Screw x 1(#0-80x3mm)\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328240165064,"sku":"HML15M02AT","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HML15M02AT.jpg?v=1771864700"},{"product_id":"align-150m-main-motor-set-9000kv-1107","title":"Align 150M Main Motor Set(9000KV\/1107) : HML15M03T","description":"\u003cp\u003eUse for T-REX 150X\u003c\/p\u003e\u003cp\u003eInput voltage: 2S\u003c\/p\u003e\u003cp\u003eKV value: 9000KV\u003c\/p\u003e\u003cp\u003eStator Dimension:1107\u003c\/p\u003e\u003cp\u003eStator Arms: 9\u003c\/p\u003e\u003cp\u003eMagnet Poles: 6\u003c\/p\u003e\u003cp\u003eDimension: 1.5x13.7x21mm\u003c\/p\u003e\u003cp\u003eWeight: 6.5g\u003c\/p\u003e\u003cp\u003eAccessories:\u003c\/p\u003e\u003cp\u003eMain Motor set x 1\u003c\/p\u003e\u003cp\u003eSocket Button Head Screw x 2(#0-80x3mm)\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328240230600,"sku":"HML15M03T","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HML15M03T-1.jpg?v=1771607434"},{"product_id":"align-t-rex-150-tail-motor-plug-pin-set","title":"Align T-Rex 150 Tail Motor Plug \u0026 Pin Set : HMP15M02T","description":"\u003cp\u003eMade by alloy copper having high electrical conductivity.\u003c\/p\u003e\u003cp\u003eSurface dealing with high electrical conductivity gilt.\u003c\/p\u003e\u003cp\u003e90° Pin Set x 3\u003c\/p\u003e\u003cp\u003eF0.8 Heat shrink tube-Black(4mm) x 3\u003c\/p\u003e\u003cp\u003eF0.8 Heat shrink tube-Red(4mm) x 3\u003c\/p\u003e\u003cp\u003eF0.8 Heat shrink tube-Blue(4mm) x 3\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328241606856,"sku":"HMP15M02T","price":6.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HMP15M02T.jpg?v=1772030471"},{"product_id":"align-t-rex-150-250-main-blade-balancer","title":"Align T-Rex 150\/250 Main Blade Balancer : HOT00010T","description":"\u003cp\u003eUse for T-REX 150\/250 Main Blades.\u003c\/p\u003e\u003cp\u003eDesigned specifically for balancing of micro helicopter main blades, Align introduces the brand new low resistance magnetic levitated main blade balancer, for precision balancing of helicopter main blades.\u003c\/p\u003e\u003cp\u003eSuitable for blades on main shaft diameter of 1.5mm and 2mm (T-Rex 150 and T-Rex 250).\u003c\/p\u003e\u003cp\u003eIncludes:\u003c\/p\u003e\u003cp\u003e150 Main Blade Balancer x 1\u003c\/p\u003e\u003cp\u003eRod(F1.5mm)For T-REX 150 x 1\u003c\/p\u003e\u003cp\u003eRod(F2mm)For T-REX 250 x 1\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328257138888,"sku":"HOT00010T","price":13.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HOT00010T-1.jpg?v=1771943003"},{"product_id":"align-hexagon-screw-driver-set-0-9mm-1-3mm","title":"Align Hexagon Screw Driver Set (0.9mm\/1.3mm) : HOT00011T","description":"\u003cp\u003eSuper hard screwdriver head mady by HSS high alloy steel, wear and distortion resisting!\u003c\/p\u003e\u003cp\u003ePurifier handle made by aluminum alloy CNC.\u003c\/p\u003e\u003cp\u003eSpecification:\u003c\/p\u003e\u003cp\u003e1.3mm Hexagon screw driver(Blue\/8.2g) x 2\u003c\/p\u003e\u003cp\u003e0.9mm Hexagon screw driver(Red\/8g) x 1\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328257171656,"sku":"HOT00011T","price":15.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HOT00011T.jpg?v=1771864037"},{"product_id":"align-t-rex-150-20-tail-blade-4","title":"Align T-Rex 150 - 20 Tail Blade (4) : HQ0203AT","description":"\u003cp\u003eUse for T-REX 150.\u003c\/p\u003e\u003cp\u003eTail Blade x 4\u003c\/p\u003e\u003cp\u003eLength: 41.35mm\u003c\/p\u003e\u003cp\u003eWeight: Approx 0.21g\/single\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328257302728,"sku":"HQ0203AT","price":6.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HQ0203AT.jpg?v=1771947898"},{"product_id":"align-20-tail-blade-green-t-rex-150","title":"Align 20 Tail Blade-Green (T-Rex 150) : HQ0203BT","description":"\u003cp\u003eSuitable for T-REX 150.\u003c\/p\u003e\u003cp\u003e20 Tail Blade-Green x 4\u003c\/p\u003e\u003cp\u003eLength: 41.35 mm\u003c\/p\u003e\u003cp\u003eWeight: Approx 0.21g\/single\u003c\/p\u003e","brand":"Align","offers":[{"title":"Default Title","offer_id":41328257335496,"sku":"HQ0203BT","price":6.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/HQ0233BT_468a9368-2ee5-48c8-a40f-df29dfe5ee55.jpg?v=1771953851"}],"url":"https:\/\/modelhelicopters.co.uk\/collections\/align-t-rex-150-spares.oembed?page=3","provider":"Midland Helicopters","version":"1.0","type":"link"}