{"product_id":"frsky-tandem-td-sr18-dual-band-stabilised-receiver-with-18-channel-ports-03022026","title":"FrSky Tandem TD SR18 Dual-Band Stabilised Receiver with 18 Channel Ports : 03022026","description":"\u003cp\u003eFrSky Tandem TD SR18 Dual-Band Stabilised Receiver with 18 Channel Ports : 03022026\u003c\/p\u003e\u003cp\u003eThe FrSky Tandem TD SR18 18 Channel dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 900Mhz and 2.4Ghz frequencies. That means Tandem receivers provide not only the low latency signal and long range control, also benefits from enhanced level of high reliability and anti-interference performance.\u003c\/p\u003e\u003cp\u003eTD SR18 also provides a socket that can be used to connect the NFC Switch panel (not included) to enable the built-in Power Switch function. Dual-power provides a safe and efficient way to power the system with your power sources connected via a pair of standard XT30 connections. The dual-power consumption system is designed to operate in balance mode, where it consumes the power line from either power source depending on which has the higher voltage. With a built-in black box module, the data (Power \u0026amp; Signal related) under unusual status during the flight can be recorded by TD receivers.\u003c\/p\u003e\u003cp\u003eThe configurable 18-channel ports are a big feature of TD SR18, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. With the FBUS protocol, the Tandem series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the builds setup.\u003c\/p\u003e\u003cp\u003eThe TD SR18 offers an ADV Stabiliser function which is an upgrade over the original classical gyroscope stabilisation modes. The ADV Stabiliser offers an advanced mode that provides more programmable stabilised channels and flexibility.\u003c\/p\u003e\u003cp\u003eThe classical stabilisation mode has been enhanced with 5 additional stabilisation channels, providing pin mapping to each channel in the multiple flight modes like Stabilisation, Auto-Level, Hover, and Knife-Edge with an airplane model.\u003c\/p\u003e\u003cp\u003eIn the advanced stabilisation mode, all the output pins are configurable for stabilisation and additional advanced features such as Stab file sharing, programmable parameters, and developer access, etc.\u003c\/p\u003e\u003cp\u003eThe advanced stabiliser feature incorporates high-precision telemetry sensors to monitor altitude, vertical speed, etc. This ADV feature is an additional benefit compared to using a regular S series stabilisation receiver.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSimultaneous Working Dual-Band (900M\/2.4G) TD Mode\u003c\/li\u003e\n\u003cli\u003eDual Power Balancing Consumption\u003c\/li\u003e\n\u003cli\u003eBuilt-in Advanced Stabilisation Functions (TD SR18)\u003c\/li\u003e\n\u003cli\u003eBuilt-in High-Precision Telemetry Sensor (Altitude, Vertical Speed, etc.) (TD SR18)\u003c\/li\u003e\n\u003cli\u003eBasic Black-Box Data Record Function\u003c\/li\u003e\n\u003cli\u003eBuilt-in Power Switch Function | Match with Different External Switches (Optional Extra - Not included)\u003c\/li\u003e\n\u003cli\u003e4ms Race Mode with Telemetry\u003c\/li\u003e\n\u003cli\u003eLong Control Range (Range varies based on the RF Power settings.)\u003c\/li\u003e\n\u003cli\u003e18 Configurable Channel Ports\u003c\/li\u003e\n\u003cli\u003eCP1: PWM \/ SBUS Out \/ FBUS \/ S.Port \/ SBUS In (Redundancy Func.)\u003c\/li\u003e\n\u003cli\u003eCP2-18: PWM \/ SBUS Out \/ FBUS \/ S.Port\u003c\/li\u003e\n\u003cli\u003eFBUS \/ S.Port\u003c\/li\u003e\n\u003cli\u003eSBUS Out Port (Supports 16CH \/ 24CH mode)\u003c\/li\u003e\n\u003cli\u003eSBUS In Port (Supports Signal Redundancy)\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) FW Update\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFrequency: 900MHz \u0026amp; 2.4GHz\u003c\/li\u003e\n\u003cli\u003eDimension: 53*40*16mm (L*W*H)\u003c\/li\u003e\n\u003cli\u003eWeight: 29.1g\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 4-10V(Recommend 2S Li Batteries)\u003c\/li\u003e\n\u003cli\u003eOperating Current: ≤195mA\u003c\/li\u003e\n\u003cli\u003eContinuous Current: ≤30A (power the device) | Instantaneous Current: ≤60A (power the device)\u003c\/li\u003e\n\u003cli\u003eVoltage Measurement Range via AIN (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)\u003c\/li\u003e\n\u003cli\u003eCompatibility: Tandem series radio \u0026amp; TD protocol capable RF module\u003c\/li\u003e\n\u003cli\u003eDual XT30 Power Input Connector\u003c\/li\u003e\n\u003cli\u003eTriple Antenna Design (2×2.4G \u0026amp; 1×900M antennas)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1x FrSky TD SR18 18Ch Dual Band Receiver\u003c\/li\u003e\u003c\/ul\u003e","brand":"FrSky","offers":[{"title":"Default Title","offer_id":58033325703549,"sku":"03022026","price":144.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/image487766186.jpg?v=1776081485","url":"https:\/\/modelhelicopters.co.uk\/products\/frsky-tandem-td-sr18-dual-band-stabilised-receiver-with-18-channel-ports-03022026","provider":"Midland Helicopters","version":"1.0","type":"link"}