{"product_id":"radiomaster-rp1-v2-expresslrs-2-4ghz-nano-receiver-hp0157-rx-rp1-v2-lbt","title":"RadioMaster RP1 V2 ExpressLRS 2.4ghz Nano Receiver : HP0157.RX-RP1-V2-LBT","description":"\u003cp\u003eRadioMaster RP1 V2 ExpressLRS 2.4ghz Nano Receiver : HP0157.RX-RP1-V2-LBT\u003c\/p\u003e\n\u003cp\u003eThe RadioMaster RP series receivers are built-in a TCXO (temperature-compensated crystal oscillator) now, which ensures reliable, stable, and accurate signal reception, allowing for superior performance in demanding environments and enhancing the flight experience.\u003c\/p\u003e\n\u003cp\u003eThe RP1 and RP2 2.4GHz ELRS nano series receivers are open-source receivers based on ExpressLRS. The Nano receivers, first developed by Jye Smith from the ExpressLRS development team, feature ESP8285 MCU and SX1280 RF chip. The RP1 has a UFL antenna socket for full-range antenna use. The RP2 has a built-in ceramic antenna which is super light and small in size and ideal for racing.\u003c\/p\u003e\n\u003cp\u003eThe RP1 and RP2 feature WIFI built in so you can upgrade firmware by WIFI and configure the Receiver via the built-in WebUI with your PC or mobile phone.\u003c\/p\u003e\n\u003cp\u003eThanks to the low-latency, high-refresh-rate RF module, the RP1 and RP2 deliver ultra-responsive performance. Their ultra-light, nano-sized design makes them suitable for a wide range of applications, fitting just about anywhere!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproved PCB design is better for heat dissipation.\u003c\/li\u003e\n\u003cli\u003eUpgraded rigid antenna with greater durability and performance.\u003c\/li\u003e\n\u003cli\u003eLED on the top side of PCB.\u003c\/li\u003e\n\u003cli\u003eSolder pads are improved and easier to solder to.\u003c\/li\u003e\n\u003cli\u003eBuilt-in a TCXO (temperature compensated crystal oscillator)\u003c\/li\u003e\n\u003cli\u003eCompatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eItem: RP1 Nano ExpressLRS 2.4ghz Receiver\u003c\/li\u003e\n\u003cli\u003eType: ISM\u003c\/li\u003e\n\u003cli\u003eMCU: EPS8285\u003c\/li\u003e\n\u003cli\u003eRF Chip: SEMTECH SX1281\u003c\/li\u003e\n\u003cli\u003eTelemetry RF power: 10mW\u003c\/li\u003e\n\u003cli\u003eAntenna: 65mm 2.4ghz T Antenna\u003c\/li\u003e\n\u003cli\u003eFrequency Range: 2.404 - 2.479 Ghz\u003c\/li\u003e\n\u003cli\u003eMaximum receive refresh rate: 500Hz \/ F1000Hz\u003c\/li\u003e\n\u003cli\u003eMinimum receiver refresh rate: 25Hz\u003c\/li\u003e\n\u003cli\u003eWorking voltage: 5v\u003c\/li\u003e\n\u003cli\u003eWeight: 2.2g (Including antenna)\u003c\/li\u003e\n\u003cli\u003eDimension: 13mm*11mm*3mm\u003c\/li\u003e\n\u003cli\u003eFirmware Version: ExpressLRS v2.4 pre-installed\u003c\/li\u003e\n\u003cli\u003eFW Target: RadioMaster RP1\/2 2400 RX\u003c\/li\u003e\n\u003cli\u003eBus interface: CRSF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTCXO (temperature compensated crystal oscillator)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe TCXO ensures high stability and accuracy in frequency control, compensating for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 * RP1 ExpressLRS 2.4ghz Nano Receiver\u003c\/li\u003e\n\u003cli\u003e1 * 65mm UFL 2.4Ghz T Antenna\u003c\/li\u003e\n\u003cli\u003e1 * User Manual\u003c\/li\u003e\n\u003cli\u003e1 * CRSF wire\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/FB_RP1_V2_RP2_V2-230823.jpg?v=1781632464\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/1_1024x1024_71f083bb-af45-47ec-818d-02a508027427.jpg?v=1781632466\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/RP-V2-Detail-Page-EN-PC-Shared_1024x1024_2.jpg?v=1781632465\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/RP1-V2-10_480x480_e37bac32-12e1-4ede-a252-86f9263dbd83.jpg?v=1781632465\" alt=\"\"\u003e\u003c\/p\u003e","brand":"RadioMaster","offers":[{"title":"Default Title","offer_id":58291468501373,"sku":"HP0157.RX-RP1-V2-LBT","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0060\/7446\/6402\/files\/image491152094.jpg?v=1781632003","url":"https:\/\/modelhelicopters.co.uk\/products\/radiomaster-rp1-v2-expresslrs-2-4ghz-nano-receiver-hp0157-rx-rp1-v2-lbt","provider":"Midland Helicopters","version":"1.0","type":"link"}