Filter
Sort by:
Show:

Align T-Rex 700X Landing Skid (White) : H70F001AXT

Use for T-REX 550/600/700/800.700X Landing Skid - Front x 1700X Landing Skid - Back x 1
H70F001XXT£8.39

Align BeastX Microbeast PLUS Flybarless System : HEGBP301T

Align BeastX Microbeast PLUS Flybarless System : HEGBP301TAlign supplied version of the popular Microbeast PLUS Flybarless System from BeastX. As supplied in many Align combo's.MICROBEAST PLUS is based on the...
HEGBP301T£144.99

Align DS615 Digital Servo : HSD61501T

Higher performance superiority, increased output torque, faster reaction time, resulting in higher holding power on those momentary pauses in between 3D maneuvers, providing precise control feel.Coreless Motor Design for fast...
HSD61501T£60.89

Align DS655 Digital Servo : HSD65501T

Ultra-speed servo for instant tail control reaction. (0.05sec/60 deg).Ultra Performance Coreless Motor with fast reaction and low current.Hardened high strength superalloy gears that increase the lifetime.Aluminum alloy mid case construction...
HSD65501T£62.99

Align T-Rex 250-500 Hardware Bag : H45168T

Suitable for all 250 class machines.Suitable for all 450 class machines.Suitable for all 470 class machines.Suitable for all 500 class machines.
H45168T£16.79

SKID PIPE : HN7049T

Use for T-REX 700 Nitro Pro.Skid pipe x 2(Φ9x325mm)Skid pipe end cap x 4
HN7049T£6.56

Align D6FF Metal Servo Horn(M2.5) - Red : HSP61015QRT

Use for T-REX 700X.D6FF Metal Servo Horn(Red) x 3F5 Linkage Ball C(M2.5x4) x 3
HSP61015QRT£22.04

Align T-Rex 700/800 M1 Torque Tube Front Drive Gear Set/23T : H70G001NXT

Use for T-REX 700E/800E. Must be used with H70G012XXT due to the slant being the opposite direction. Brand new low drive gear ratio with high strength and wear resistance,effectively reduce...
H70G001NXT£14.69

Torque Tube Rear Drive Gear Set - Trex 700/800 : HN7042BT

Torque Tube Rear Drive Gear Set - Trex 700/800 : HN7042BTUse for T-REX 800/700 Nitro Pro/700E.Must use with 700 Metal Tail Rotor Holder (H70T001BXT).Utilizes newly developed, highest spec and superior...
HN7042BT£17.33

Align T-Rex 700X Landing Skid - Black : H70F001XAT

Use for T-REX 550/600/700/800.700X Landing Skid - Front x 1700X Landing Skid - Back x 1
H70F001XAT£8.39

Align Hook & Loop Fastening Tape (2) : H60054

Align Hook & Loop Fastening Tape (2) : H60054Hook & Loop fastening tape x 2(20x345mm)
H60054£4.73

Tail Drive Bearing Mount (2) : H60124

Use for T-REX 550E/600/600/700 Nitro.Torque tube bearing holder x 2 (Φ14xΦ20.7x13mm)Bearing MR148ZZ x 2 (Φ8xΦ14x4mm)EZO Made in Japan
H60124£10.49

SKID PIPE - SILVER 700 : HN7049QFT

6061-T6 Aluminum alloy material.Use for T-REX 700.Skid pipe x 2(Φ9x325mm)Skid pipe end cap x 4
HN7049QFT£6.56

FEATHERING SHAFT (2) : HN7025T

FEATHERING SHAFT (2)
HN7025T£10.49

Align T-Rex 700 Tail Boom Support Rods : H7NT007XXT

Use for 700X/700L/700N/700XN/700E/760X/800E.Carbon fibre material.Specification:700XN Tail boom Supports × 2 (Φ3xΦ7.95x550mm)M4 Washer × 4 (F4xF8×1mm)Socket Screw x 2 (M4x12mm)Socket Screw x 2 (M4x14mm)
H7NT007XXT£16.28

Align T-Rex 700 DFC Main Shaft (H70093AT)

Use for T-REX 700DFC (H70089A).700DFC Main shaft x 2Socket collar screw x 1(M4x24mm)Socket buton head collar screw x 1(M4x27mm)Socket screw x 2(M4x8mm)M4 nut x 2Main shaft spacer(0.8) × 1(Φ12xΦ16x0.8mm)Main shaft...
H70093T£19.43

New Main Rotor Holders : HN7116T

Suitable for T-REX 700E / 700N. 6061-T6 Aluminum alloy material and CNC processed.Metal Main rotor holder x 2MR6800ZZ Bearing x 4(Φ10xΦ19x5mm)Washer x 4Socket collar screw x 2(M5x32mm)M5 nut x 2Bearing...
HN7116T£51.44

Align DS820M High Voltage Brushless Servo : HSD82001T

Designed specifically for helicopters,utilizes brushless motor for fast speed, high torque and super efficiency reaction, allowing helicopter to perform with faster and higher precision. Brand new high voltage brushless servo...
HSD82001T£129.99

Align T-Rex 760X Linkage Rod Set : H76Z001XXT

Use for T-REX 760X.6061-T6 Aluminum alloy material and CNC processed.Specification:760X Linkage Rod A x 2 (M3x35mm)700X Linkage Rod A x 3 (M3x41mm)700 Elevator Ball Link x 10 (F5xF6x19mm)700DFC Linkage Rod...
H76Z001XXT£16.28

700DFC Head Dampers : H70096T

Use for T-REX 700DFC.Manufactured utilizing POM material, sleek surface, with superior anti-wear characteristic.700DFC Head Damper x 4 (F10xF17x7mm)
H70096T£7.34

Align E1 Two-Blade Swashplate (E1/800/700) (HE1H005XXT)

Align E1 Two-Blade Swashplate (E1/800/700) (HE1H005XXT)Suitable for ALIGN E1, T-REX 700/800.Aluminium alloy material.Specification: E1 swashplate x 1 Washer x 3 (Φ2.6xΦ5.8x0.6mm) Socket Button Head Screw x 3 (M2.5x5mm) Bearing(6706ZZ) x...
HE1H005XXT£55.64

Align DS820 High Voltage Brushless Servo : HSD82002T

Designed specifically for helicopters,utilizes brushless motor for fast speed, high torque and super efficiency reaction, allowing helicopter to perform with faster and higher precision. Brand new high voltage brushless servo...
HSD82002T£104.99

Main Blade Screws Set : HN7081T

Main Blade Screws Set : HN7081T
HN7081T£5.51

Align M6 Socket Collar Screw : H70Z011XXT

Align M6 Socket Collar Screw : H70Z011XXTFeathering Spindle Bolts.Suitable for TB70 / TN70 / T-REX 700/760/800M6 socket collar screw(M6x16mm) × 6
H70Z011XXT£2.65

Align Linkage Ball M2.5 : H70Z010AXT

Align Linkage Ball M2.5 : H70Z010AXTUse for T-REX 550X / 600L / 600XN / 650X / 700E / 700L / 700X / 700XN / 760X / 800E?ALIGN E1. Linkage Ball(M2.5x3.5)...
H70Z010AXT£7.34

Align T-Rex Motor Slant Thread Pinion Gear 12T (L27) : H70G010XXT

Use for T-REX 700E / 800E.Highly enhance structural strength, effectively increase the torsional capability.Must with CNC Slant Thread Main Drive Gear/112T(H70G002AXW) Motor Slant Thread Pinion Gear 12T x 1 (M1/12T)...
H70G010XXT£9.44

CARBON STABILISER/2.0MM : HN7029T

CARBON STABILISER/2.0MM
HN7029T£20.99

Align T-Rex 700-800 Blade Clips : H70H001XXT

Suitable for T-REX 700/800.The material of Rotor Clips for main/tail blades are high strength composite plastic steel, providing bigger contact area between clip and blade, not only increase its grab...
H70H001XXT£7.34

Align 102T M1 Helical Autorotation Tail Drive Gear Set : H70G012XXT

Use for T-REX 700X/700E/800E. Must be used with H70G001NXT front torque tube drive gears due to the slant being the opposite direction. Brand new low drive gear ratio with high strength and...
H70G012XXT£26.24

Align DS825 High Voltage Brushless Servo : HSD82502T

Designed specifically for helicopters,utilizes brushless motor for fast speed, high torque and super efficiency reaction, allowing helicopter to perform with faster and higher precision.Rudder servo with 0.02sec/60° ultra high speed...
HSD82502T£104.99

Align T-Rex 700E Tri-Blades Linkage Ball Set : H70Z006XXT

Use for 700E Three-Blade Set.F5 Linkage Ball B(M3x4) x 3700N Linkage Ball B(M3x4) x 8 F5 Linkage Ball D(M3x3.5) x 1 F5 Long Linkage Ball(M3x4) x 1
H70Z006XXT£12.59

Align T-Rex Torque Tube Front Drive Gear Set 19T/M1.25 (HE1G005XXT)

Align T-Rex Torque Tube Front Drive Gear Set 19T/M1.25 (HE1G005XXT)Use for ALIGN E1, T-REX 700/760/800.New upgrade high-strength drive gear for E1/ T-REX 800/760/700. The new torque tube umbrella gear are...
HE1G005XXT£22.04

Align DS825M High Voltage Brushless Servo

Designed specifically for helicopters,utilizes brushless motor for fast speed, high torque and super efficiency reaction, allowing helicopter to perform with faster and higher precision.Rudder servo with 0.02sec/60° ultra high speed...
HSD82501T£129.99

Align T-Rex 760X F3C Main Rotor Holder Arm (2) : H76H002XXT

Use for T-REX 760X.6061-T6 Aluminum alloy material and CNC processed.New F3C holder arm effectively doubling the flight stability, and the excellent fine control accuracy; not only in the static flight...
H76H002XXT£26.24

THRUST BEARING SET : HN7003T

THRUST BEARING SET : HN7003T
HN7003T£9.44

Feathering Shaft Sleeve : HN7111T

Feathering Shaft Sleeve
HN7111T£6.56

Align T-Rex 800E PRO Vertical Fin (White) : H80T014XXT

Align T-Rex 800E PRO Vertical Fin (White)
H80T014XXT£26.24

Align T-Rex 760X 3D Main Rotor Holder Arm (2) : H76H001XXT

** NOTE THIS REPLACES ITEM H70H006XXT **Use for T-REX 760X.6061-T6 Aluminum alloy material and CNC processed.The 3D holder arm has excellent rigidity and toughness, suitable for extreme 3D flight, features...
H76H001XXT£26.24

BEARING (6800ZZ/689ZZ) (3) : H60105

BEARING (6800ZZ/689ZZ) (3) : H60105Includes: Bearing 6800ZZ x 2(Φ10xΦ19x5mm) Bearing 689ZZ x 1(Φ9xΦ17x5mm)
H60105£9.44

Main Shaft Spacer Set : HN7075

Main  Shaft Spacer Set
HN7075£5.51

METAL STABILISER BELT SET - TREX 700 : HN7041T

METAL STABILISER BELT SET - TREX 700
HN7041T£17.33

Align T-Rex 760 Upgrade Tail Assembly : H76T001XXT

Use for T-REX 760 / 700X / 700L / 700E.Lengthened tail boom design which can be used with 760/780 main blades has a better flight stability and is suitable for...
H76T001XXT£68.24

Align T-Rex 700X Canopy Mounting Bolt : H70B011XXT

Use for T-REX 700X.700X Canopy Mounting Bolt x 2Canopy Front Mounting Bolt x 2Socket Screw(M3x8mm) x 4
H70B011XXT£10.76

Align T-Rex Torque Tube Rear Drive Gear Set/19T (H70G014XXT)

Align T-Rex Torque Tube Rear Drive Gear Set/19T (H70G014XXT)Use for T-REX 700/800.Must be used with 700 Tail Rotor Holder (H70T001BXT).New upgrade high-strength drive gear for T-REX 800/700. The new torque...
H70G014XXT£18.89

Align 105mm 3 Blade Set Carbon Fibre Tail Blades : HQ1050ET

Align 105mm 3 Blade Set Carbon Fibre Tail Blades : HQ1050ETSuitable for T-REX 760 / 700E Three Tail Blade Set.3K carbon fibre made, new light-weight design, improve the efficiency of...
HQ1050ET£40.94

RigidCore Align 700 Magic Dampeners : AAVXG0300

RigidCore Align 700 Magic Dampeners : AAVXG0300XGuard RC Rigidcore Dampers are revolutionary in design; often copied, and never perfected. Years of development went into the Rigidcore Dampers originally found in...
AAVXG0300£24.95

Align 760 Carbon Fiber Blades : HD760A

Use for T-REX 760X.New extended 760 carbon fiber main blades effectively improve the flying stability and power performance. Enhance the power for better control and redefine your flying experience. And...
HD760A£124.99

Align One-way Bearing Mount - T-Rex 700/800 : H7NG003XXT

Align One-way Bearing Mount - T-Rex 700/800 : H7NG003XXTUse for T-REX 700 Nitro Pro/700E/700L/800E.Enhance structural strength also extend one-way bearing durability and service life.***Please note: One way bearing not included...
H7NG003XXT£35.69
Show: