XLPower XL520

XLPower Canopy Edge Protection : XL70A12

XLPower Canopy Edge Protection : XL70A121 Metre

XL70A12£3.99

XLPower Tailboom Antenna Support : XL70A15

XL70A15£7.99

XLPower Servo Horn For 520/550 (4) : XL52A19

XLPower Servo Horn For 520/550 (4) : XL52A19Futaba spline to fit standard size Futaba, Align, Savox, etc servos.Hole positions at 14mm, 17mm and 20mm

XL52A19£5.99

Wire Mesh Guard (Black) : XL70A14-2

Wire Mesh Guard (Black) : XL70A14-2 6mm Wire Mesh Guard?1Meter? 10mm Heat Shrinkable Tube?Length?15mm?1 PSC?

XL70A14-2£2.99

XL52H06 Feathering Shaft

This is a replacement XLPower Feathering Shaft, suited for the XLPower 520 & 550 helicopters.Dimensions: 8mm x 81mm

XL52H06£3.99

Wire Mesh Guard (Yellow) : XL70A14-1

XL70A14-1£2.99

Sold Out

XL52B24-1 Slant Thread Main Drive Gear/106T

This is a replacement XLPower 106T Slant Thread Main Drive Gear, suited for the XLPower 520 & 550 helicopters.

XL52B24-1£16.99

Sold Out

XL52T15 Tail Shaft

This is a replacement XLPower Tail Shaft, suited for the XLPower 520 & 550 helicopters.

XL52T15£2.70

XL52H12 Rotor Linkage Rod Set

This is a replacement XLPower Rotor Head Linkage Rod Set, suited for the XLPower 520 & 550 helicopters.

XL52H12£8.99

Tail Rotor Control Lever Screw : XL52T09-2

XL52T09-2£1.99

XL52T14 Tail Feathering Shaft

This is a replacement XLPower Tail Feathering Shaft, suited for use with the XLPower 520 & 550 helicopters.

XL52T14£2.99

XL52B15 Skid Pipe (2)

This is a replacement set of XLPower Skid Pipes, suited for use with the XLPower 520 & 550 helicopters. Specification: Skid Pipe x2 End Plugs x4

XL52B15£4.50

XL52A10 MR148ZZ Main Rotor Holder Bearing - 8 x 14 x 4mm (2)

XL52A10 MR148ZZ Main Rotor Holder Bearing - 8 x 14 x 4mm (2) Suitable for XL52H02 Main Rotor Holder

XL52A10£2.99

XL52T23 550 Tail Linkage Rod

XL52T23 550 Tail Linkage Rod This is a replacement XLPower 550 Carbon Tail Control Rod Assembly, suited for use with the XLPower 520 & 550 helicopters.

XL52T23£5.99

XL52T11 Tail Control Link (2)

This is a replacement set of XL Power Tail Control Links.Suitable for use on the XLPower 520, 550 and Specter 700 helicopters.

XL52T11£2.80

XLPower Hook and Loop Tape/520/550/700 : XL70A08

XLPower Hook and Loop Tape/520/550/700 : XL70A08SPECIFICATION: 25*100mm Hook and Loop Tape?2 Pairs? 40*100mm Hook and Loop Tape?2 Pairs?

XL70A08£2.49

520/550 POM Head Damper XLPower : XL52H14-1

XL52H14-1£5.99

XL52H13 Servo Linkage Rod Set

This is a replacement XLPower Servo Linkage Rod Set, suited for the XLPower 520 & 550 helicopters.

XL52H13£5.99

XL52B27 Canopy Grommets

This is a replacement package of four XLPower Canopy Grommets, suited for the XLPower 520 & 550 helicopters.

XL52B27£2.99

XL52A09 6800ZZ Bearing - 10 x 19 x 5mm (2)

XL52A09 6800ZZ Bearing - 10 x 19 x 5mm (2) Suitable for XL52B01 Metal Main Shaft Bearing Block

XL52A09£2.99

106T Heavy Duty CNC Main Gear V2 : XL52B24-3

XL52B24-3£18.99

XLPower 4025-1100kv Motor : XL52M03

XLPower 4025-1100kv Motor : XL52M0325mm bolt hole mounting spacing (centre to centre).Specification Stator Diameter 40mm Stator Thickness 25mm No.of Stator Arms 12 Magent Poles 10 Motor Wind 3.5T/? Motor Wire...

XL52M03£128.99

Hook and Loop Fastening Tape 25 x 300mm : XL52A05

XL52A05£1.50

XLPower 520/550 Ball Link : XL52A02

XLPower 520/550 Ball Link : XL52A02Includes: 6x M2 Ball Link 4x M2.6 Ball Link

XL52A02£2.99

XL52T09 Metal Tail Pitch Slider Assembly

This is a replacement XLPower Tail Pitch Slider Assembly, suited for use with the XLPower 520 & 550 helicopters.

XL52T09£12.99

XL52T03 Tail Belt

This is a replacement XLPower 520 Tail Belt, suited for use with the XLPower 520 & 550 helicopters.

XL52T03£4.99

XL52H10 Main Rotor Thrust Bearing

This is a replacement set of two XLPower Main Rotor Thrust Bearings, suited for use with the XLPower 520 & 550 helicopters.

XL52H10£5.30

XL52B16-B Black Landing Gear (2)

This is a replacement set of XLPower Landing Skids, suited for the XLPower 520 & 550 helicopters. Specification: Landing Gear x2 M3x3 Set Screw x4

XL52B16£4.99

XL52A07 Large Servo Horn (3)

XL52A07£2.30

-36%

XLPower Nimbus and XL520 RigidCore Magic Dampeners : AAVXG0315

XLPower Nimbus and XL520 RigidCore Magic Dampeners : AAVXG0315The Time-Proven best Dampeners in existence, the RigidCore™ Magic Dampeners are finally available for other helicopter brands. Using a custom-made non-linear compression...

AAVXG0315~~£19.50~~ £12.50

XLPower 1:1 Swashplate - Nimbus 550 : XL52H04-2

XL52H04-2£39.99

Servo Mount Nuts : XL52A03

XL52A03£2.70

XL52T28 Tail Feathering Shaft Damper

This is a replacement set of XLPower Tail Feathering Shaft Dampers, suited for use with the XLPower 520 & 550 helicopters.

XL52T28£3.99

XL52T01-2 Orange Tail Boom

This is an optional XLPower 520 Orange Tail Boom.Dimensions: Length: 583mm Diameter: 20mm

XL52T01-2£6.99

XL52G12-1 Heavy Duty Motor Pinion 12T 16MM

This is a replacement XLPower 12T Helical Pinion Gear, suited for use with the XLPower 520 & 550 helicopters.This pinion has a 6mm bore, and comes with a sleeve that...

XL52G12-1£7.49

XL52A15 HF1012 One-way Bearing - 10 x 14 x 12mm

This is a replacement XLPower One-Way Bearing (HF1012), suited for the XLPower 520 & 550 helicopters.

XL52A15£8.19

XL52A11 MR84ZZ Tail Blade Holder Bearing - 4 x 8 x 3mm (4)

XL52A11 MR84ZZ Tail Blade Holder Bearing - 4 x 8 x 3mm (4) Use For Tail Blade Holder

XL52A11£5.99

XL52A08 F695ZZ Bearing - 5 x 13 x 4mm (2)

This is a replacement package of two XLPower 5x13x4mm Flanged Bearings. : XL52A08

XL52A08£3.09

XL52A04 Carbon Fibre Servo Mounting Washers (10)

XL52A04£2.70

XL52A01 Metal Ball

This is a replacement package of XLPower Linkage Balls, suited for the XLPower 520 & 550 helicopters. Contains all linkage balls necessary for one entire helicopter. 4.72*9.5mm ball * 5...

XL52A01£5.99