Transmits Flight Pack or Receiver Pack voltage to the transmitterPewired to accept EC3/IC3 ConnectorTM1000 and a Telemetry Capable Transmitter required
Sensor for measuring motor/engine RPM's in airplanes and helicopters, Used in conjunction with the SPM9548 Telemetry Module, the Sensor Board and Sensor is used for measuring motor/engine RPM's, Plug and...
AR8020T 8 Channel Telemetry Receiver : SPMAR8020T Overview The Spektrum™ AR8020T 8 Channel Receiver is a DSM2® and DSMX® capable receiver with a compact footprint to fit in a wide...
Current/Voltage/Capacity Sensor - Logo 200 : 05492Current/Voltage/Capacitysensor for VBar ControlHardware Features of the Current/Voltage/Capacity Sensor for flight packs Plug & play version with XT30 connectors and sensor wire, perfect fit...
DSMX SRXL2 Serial Receiver with Telemetry : SPM4651TFeatures SRXL2 Technology Low Noise Amplifier - Helps Reduce Interference and Produce Extended Control Link Range Small, Lightweight and Perfect for Heli, Multi-Rotor...
This lead allows you to measure external battery voltages and send the information back to your Futaba FASSTest telemetry capable transmitter using an S-Bus receiver such as the R3008SB/R7003SB/R7008SB :...
A Futaba FASSTest voltage sensor capable of measuring receiver battery voltage (3.5 - 8.4v) and the voltage of a second battery (0-100v) or power supply.Specification:External Line Voltage: 0 - 100vNormal...
This highly advanced Futaba sensor allows you to measure the position ( longitude & latitude), distance, speed, rate of climb/decent and altitude of you aircraft using GPS data and the...
Hobbywing RPM & Telemetry Signal Coupler Module : HW30850200OverviewThe RPM & Telemetry Signal Coupler Module, or SCM for short, solves the issues like “RPM signal from ESC cannot be correctly...
Kontronik Telemetry Cable JR : 9703The new telemetry cable serves as a connection between receiver and controller.It can be used together with the KOLIBRI.Also, the KONTRONK protocol can be used...
Almost all major remote control manufacturers now offer telemetry-enabled systems. The KONTRONIK speed controllers with integrated module interface are prepared for this. Simply connect the appropriate TelMe to a module...
Prerequisite:A VBar or Mini VBar with RX 1/RX 2 ports, a VBar Control Voltage/Current Sensor and Battery ID Tags are required.Application:Using the Battery ID Reader, VBar Control can automatically and...
RPM Cable (for Power and RPM Module) : 30020RCThe adapter cable is used in combination with the Add-On Power & RPM module that can be connected to either the RC...
Scorpion Spektrum X-Bus Telemetry Cable : spektrum_telemetry_cable Real Time Telemetry data is not only convenient, but it has proven itself to be a vital tool to ensure the safety of...
20-inch external voltage sensor
Flight pack battery sensor for electric-powered aircraft or ignition batteries in gas engine-powered aircraft
TM1000 and a Telemetry Capable Transmitter required
XGuard High-Reliability Terminal-Less 4-Pin 12 Inch Extension : AAVXG0128Our custom cables are made using high-reliability connectors that don't use terminals preventing the breakage of wires at the connector.This is a...