Filter
Sort by:
Show:
Pinion for herringbone gear 19teeth, M1, dia.8mm

Pinion for herringbone gear 19teeth, M1, dia.8mm (04490)

Pinion for herringbone gear 19teeth, M1, dia.8mm
MIK4490£18.25
-74%
Counterbearing 30mm for Motorshaft 5mm

Counterbearing 30mm for Motorshaft 5mm (04470)

Counterbearing 30mm for Motorshaft 5mm, Replacement bearing number is: 695ZZW5
MIK4470£19.15 £4.99
Tail boom brace LOGO 400 SE

Tail boom brace LOGO 400 SE (04461)

Tail boom brace LOGO 400 SE
MIK4461£9.09
Mikado Tailboom LOGO 400 SE 520mm (04435)

Mikado Tailboom LOGO 400 SE 520mm (04435)

Mikado Tailboom LOGO 400 SE 520mm (04435)
MIK4435£11.75
Tail servo holder, LOGO 500/600 Carbon

Tail servo holder, LOGO 500/600 Carbon (04409)

Tail servo holder, LOGO 500/600 Carbon
MIK4409£9.09
Frame support left, LOGO 500/600 Carbon

Frame support left, LOGO 500/600 Carbon (04407)

Frame support left, LOGO 500/600 Carbon
MIK4407£26.65
Frame support right, LOGO 500/600 Carbon

Frame support right, LOGO 500/600 Carbon (04406)

Frame support right, LOGO 500/600 Carbon
MIK4406£26.65
Tail boom holder dia.20mm, LOGO 500/600 Carbon

Tail boom holder dia.20mm, LOGO 500/600 Carbon (04404)

Tail boom holder dia.20mm, LOGO 500/600 Carbon
MIK4404£20.99
Tail boom holder dia.25mm, LOGO 500/600 Carbon

Tail boom holder dia.25mm, LOGO 500/600 Carbon (04403)

Tail boom holder dia.25mm, LOGO 500/600 Carbon
MIK4403£17.61
Sold Out
Gyroplate, LOGO 500/600 Carbon

Gyroplate, LOGO 500/600 Carbon (04401)

Gyroplate, LOGO 500/600 Carbon
MIK4401£13.00
Speed controler mounting plate, LOGO 500/600 Carbon

Speed controler mounting plate, LOGO 500/600 Carbon (04396)

Speed controler mounting plate, LOGO 500/600 Carbon
MIK4396£13.95
Servo mounting plate, LOGO 500/600 Carbon

Servo mounting plate, LOGO 500/600 Carbon (04395)

Servo mounting plate, LOGO 500/600 Carbon
MIK4395£19.15
RC- plate, LOGO 500/600 Carbon

RC- plate, LOGO 500/600 Carbon (04393)

RC- plate, LOGO 500/600 Carbon
MIK4393£7.25
-51%
Vertical frame plates, LOGO 500/600 Carbon

Vertical frame plates, LOGO 500/600 Carbon (04392)

Vertical frame plates, LOGO 500/600 Carbon
MIK4392£16.80 £8.25
Sideframe left, LOGO 500/600 Carbon

Sideframe left, LOGO 500/600 Carbon (04390)

Sideframe left, LOGO 500/600 Carbon
MIK4390£43.50
-50%
Sideframe right, LOGO 500/600 Carbon

Sideframe right, LOGO 500/600 Carbon (04389)

Sideframe right, LOGO 500/600 Carbon
MIK4389£44.99 £22.50
Landing struts low profile LOGO 500 black

Landing struts low profile LOGO 500 black (04289)

Landing struts low profile LOGO 500 black
MIK4289£17.99
Landing struts low profile LOGO 500 white

Landing struts low profile LOGO 500 white (04287)

Landing struts low profile LOGO 500 white
MIK4287£17.99
Front Canopy Support Set LOGO 500 : 04280

Front Canopy Support Set LOGO 500 : 04280 (04280)

Front Canopy Support Set LOGO 500 : 04280
MIK4280£4.29
Carbon belt tensioner LOGO 500 SE

Carbon belt tensioner LOGO 500 SE (04274)

Carbon belt tensioner LOGO 500 SE
MIK4274£4.50
-75%
BLADE HOLDER EXTENSION - TREX 700 (2)

Blade Holder Extension - Trex 700 (2) (04249)

Blade Holder Extension - Trex 700 (2) (04249)
MIK4249£33.99 £8.50
CARBON CONTROL ROD FOR TAIL - LOGO 500 SE

CARBON CONTROL ROD FOR TAIL - LOGO 500 SE

Carbon Control Rod For Tail - Logo 500 SEDiameter : 4mmLength : 623mm
MIK4237£8.99
Clamps for carbon tailrotor Ø 20mm - LOGO 480 XXTREME

Clamps for carbon tailrotor ?20mm - LOGO 480 XXTREME (04232)

Clamps for carbon tailrotor Ø20mm - LOGO 480 XXTREME
MIK4232£4.10
Mikado Pinion for herringbone gear 16 teeth, M0.7 : 04216

Mikado Pinion for herringbone gear 16 teeth, M0.7 : 04216 (04216)

A replacement 16T M0.7 Herringbone Pinion Gear suited for use with the Mikado Logo series of helicopters. Supports 5mm Motor Shaft Diameters
MIK4216£18.25
Sold Out
Blade Holder - LOGO 400 (2)

Blade Holder - LOGO 400 (2) (04205)

Blade Holder - LOGO 400 (2)
MIK4205£9.09
Pivot bolt M3 x 10 swashplate (long)

Pivot bolt M3 x 10 swashplate (long) (04192)

Pivot bolt M3x10 swashplate (long)
MIK4192£5.89
Pivot bolt swashplate M3 x 8 (short)

Pivot bolt swashplate M3 x 8 (short) (04191)

Pivot bolt swashplate M3x8 (short)
MIK4191£6.45
-76%
Main Frame Left LOGO 10/400 for midi servo size

Main Frame Left LOGO 10/400 for midi servo size (04188)

Main Frame Left LOGO 10/400 for midi servo size
MIK4188£8.25 £1.99
-76%
Main Frame Right LOGO 10/400 for midi servos

Main Frame Right LOGO 10/400 for midi servos (04187)

Main Frame Right LOGO 10/400 for midi servos
MIK4187£8.25 £1.99
Battery Support - LOGO 400

Battery Support - LOGO 400 (04185)

Battery Support - LOGO 400
MIK4185£8.25
Fin Set - LOGO 400

Fin Set - LOGO 400 (04182)

Fin Set - LOGO 400
MIK4182£7.99
-13%
Tailboom - LOGO 400 (2)

Tailboom - LOGO 400 (2) (04181)

Tailboom - LOGO 400 (2)
MIK4181£9.50 £8.25
HOLLOW MAIN ROTOR SHAFT - LOGO 400 VBAR (HARDENED)

Hollow Main Rotor Shaft- Logo 400 VBar (Hardened) (04180)

Hollow Main Rotor Shaft- Logo 400 VBar (Hardened)
MIK4180£26.89
-72%
Carbon Control Rod for Tail - LOGO 400

Carbon Control Rod for Tail - LOGO 400 (04179)

Carbon Control Rod for Tail - LOGO 400
MIK4179£7.20 £1.99
-73%
Carbon tail boom brace LOGO 400

Carbon tail boom brace LOGO 400 (04178)

Carbon tail boom brace LOGO 400
MIK4178£8.26 £2.25
Vertical stabilizer for carbon tail case LOGO 500

Vertical stabilizer for carbon tail case LOGO 500 (04174)

Vertical stabilizer for carbon tail case LOGO 500
MIK4174£16.58
Metal Motorplate - LOGO 400

Metal Motorplate - LOGO 400 (04170)

Metal Motorplate - LOGO 400
MIK4170£16.59
V-BAR CONTROL PANEL

V-Bar Control Panel (04152)

The V-Bar Control Panel is connected directly to the V-Bar via cable and allows you to program the V-Bar with necessary data such as initial set-up and parameter adjustment right...
MIK4152£71.99
Sold Out
Driven belt 430XL

Driven belt 430XL (04150)

Driven belt 430XL (400 3D)
MIK4150£7.65
Canopy holders LOGO 600-DX

Canopy holders LOGO 600-DX (04140)

Canopy holders LOGO 600-DX
MIK4140£6.50
-74%
Pinion for herringbone gear 23 teeth, M0,5

Pinion for herringbone gear 23 teeth, M0,5 (04123)

Pinion for herringbone gear 23 teeth, M0,5 (04123)
MIK4123£14.50 £3.75
-75%
Pinion for herringbone gear 21 teeth, M0,5

Pinion for herringbone gear 21 teeth, M0,5 (04121)

Pinion for herringbone gear 21 teeth, M0,5
MIK4121£13.25 £3.25
-75%
Pinion for herringbone gear 20 teeth, M0,5

Pinion for herringbone gear 20 teeth, M0,5 (04120)

Pinion for herringbone gear 20 teeth, M0,5
MIK4120£13.25 £3.25
-75%
Pinion for herringbone gear 19 teeth, M0,5

Pinion for herringbone gear 19 teeth, M0,5 (04119)

Pinion for herringbone gear 19 teeth, M0,5
MIK4119£13.25 £3.25
-75%
Pinion for herringbone gear 17 teeth, M0,5

Pinion for herringbone gear 17 teeth, M0,5 (04117)

Pinion for herringbone gear 17 teeth, M0,5
MIK4117£13.25 £3.25
-75%
Balls dia 2.5 (10)

Balls dia 2.5 (10) (04106)

Balls dia 2.5 (10)
MIK4106£4.94 £1.25
CARBON CONTROL ROD FOR TAIL - LOGO 500

CARBON CONTROL ROD FOR TAIL - LOGO 500 (04095)

CARBON CONTROL ROD FOR TAIL - LOGO 500Length: 525mm (Carbon rod without ends installed)
MIK4095£9.50
CARBON FRAME FOR TAILROTOR CASE, BOOM DIA 25MM

Carbon Frame For Tailrotor Case, Boom Dia 25mm (04078)

Carbon Frame For Tailrotor Case, Boom Dia 25mm
MIK4078£17.50
Show: