All Mikado

Current/Voltage/Capacity Sensor - Logo 200 : 05492

Current/Voltage/Capacity Sensor - Logo 200 : 05492Current/Voltage/Capacitysensor for VBar ControlHardware Features of the Current/Voltage/Capacity Sensor for flight packs Plug & play version with XT30 connectors and sensor wire, perfect fit...

MIK5492£52.99

Servo Wire Braided Sleeving Wrap, 1 Meter : 04593

Servo Wire Braided Sleeving Wrap, 1 Meter

MIK4593£3.99

Tail rotor control sleeve assembly LOGO 600 : 04235

Tail rotor control sleeve assembly LOGO 600

MIK4235£21.15

Mikado Pocket bag black for VBar Control : 04927

Mikado Pocket bag black for VBar Control : 04927Carrying bag for VBar Control, with inside and outside pockets and shoulder strap.

MIK4927£63.99

Mikado Tool Set VBar Control : 05577

Mikado Tool Set VBar Control : 05577Includes: Stainless steel socket wrench for the finishing caps of all switches T6 socket wrench for all T6 Torx bolts in VBar Control Spare...

MIK5577£26.99

Mikado VBar EVO Alu-case, Purple, VLink 7.x Express : 05570

Mikado VBar EVO Aluminium case, Purple, VLink 7.x Express : 05570New processor: 500 MHz (NEO: 98 MHz), more memory, FPU, highest available computing power on the market to this dateInnovative...

MIK5570£299.99

Carbon Vertical Fin, LOGO 200 : 05426

MIK5426£9.99

Mikado VBar EVO RX-Only Satellite Receiver : 05670

Mikado VBar EVO RX-Only Satellite Receiver : 05670 Adds additional receiver hardware to a VBar EVO VLink for antenna diversity and redundancy Super lightweight, tiny footprint Optimised receiver circuit design...

MIK5670£54.99

Sold Out

Mikado VBar EVO Alu-case, Gold, VLink 7.x Express : 05574

Mikado VBar EVO Aluminium case, Gold, VLink 7.x Express : 05574New processor: 500 MHz (NEO: 98 MHz), more memory, FPU, highest available computing power on the market to this dateInnovative...

MIK5574£299.99

Charging Cable XT30, LOGO 200/OMP M2 : 05436

Charging Cable XT30, LOGO 200 : 05436 Also suitable for the OMP M2 Series

MIK5436£6.19

Linkage-Set Swashplate, LOGO 200 : 05418

MIK5418£12.99

Mikado VBar Control lanyard : 04893

Mikado VBar Control lanyard

MIK4893£4.50

Driven Belt 638XL - Logo 550 SX (04076)

Driven Belt 638XL - Logo 550 SX

MIK4076£10.99

Mikado VBar Control EVO+ (Digital Gimbals) (Deep Ocean Blue) : 05608

NEW: Fully digital gimbals Tough yet lightweight design High precision readout with 8 parameters per axis 3D sensor sampling (3 Hall sensors per axis) Fully integrated in VBar Control EVO...

MIK5608£1,279.99

Sold Out

Conversion Kit VBar NEO to VBar NEO VLink : 05062 (Currently White)

Case for VBar NEO including 180 mm 2.4 GHz antenna wiresFor the 2nd hardware generationMIK4945/MIK4946 VBar NEO 6.1 Express (with antenna connectors on the main board)VBar NEOs of the 1st...

MIK5062£18.25

Temperature Sensor (300 Â°C) VBar Control

Temperature Sensor (300 C) VBar Control : 05058

This sensor only works with VBar NEO, older devices such as Mini VBar/Blueline/Silverline are not supported.

MIK5058£30.99

Tail Rotor Hub with Thrust Bearings (Full Set) : 04615

Tail Rotor Hub with Thrust Bearings (Full Set)

MIK4615£28.69

Sold Out

Canopy grommets (2) (02503)

For the Logo 400/500/600

MIK2503£1.75

Radio Case Faux Leather, VBar Control : 05482

Radio Case Faux Leather, VBar Control : 05482Transport case for VBar Control

MIK5482£72.50

Mikado VBar Control RX-Satellite (04882)

Mikado VBar Control RX-Satellite

MIK4882£54.99

Sold Out

Tailboom 22 x 690mm LOGO 500 SE : 04768

Tailboom Ø22 x 690mm LOGO 500 SE

MIK4768£8.99

Spindle shaft 86mm, steel : 02347

Spindle shaft 86mm, steel

MIK2347£17.25

-4%

Landing bow low profile, black, LOGO 500/600/800 : 04290

Landing bow low profile, black, LOGO 500/600

MIK4290~~£9.50~~ £9.09

Balls Ã˜4.8mm with 2mm hole (10) : 01570

Balls 4.8mm with 2mm hole (10) : 01570

MIK1570£6.35

Motor Tail Rotor, LOGO 200 : 05428

MIK5428£24.75

Servo arm, LOGO 200 : 05440

MIK5440£6.89

Sold Out

3-Position Switch (Short) Vbar Control : 04978

3-Position Switch (Short) Vbar Control

MIK4978£15.49

Ball links 3mm for 6mm ball - XXtreme (10)

Ball links 3mm for 6mm ball (10) LOGO 700/800 : 04598

Ball links 3mm for 6mm ball (10) LOGO 700/800 (04598)

MIK4598£8.75

Tail rotor blade holder : 02462

Tail rotor blade holder

MIK2462£7.79

Ball Links 2.5mm (20 pieces) : 01567

Ball Links 2.5mm (20 pieces)

MIK1567£9.65

Safety ring 10mm (01344)

Safety ring - 10mm

MIK1344£2.25

Mikado VBar Control EVO+ (Digital Gimbals) (Gunmetal Grey) : 05610

NEW: Fully digital gimbals Tough yet lightweight design High precision readout with 8 parameters per axis 3D sensor sampling (3 Hall sensors per axis) Fully integrated in VBar Control EVO...

MIK5610£1,279.99