Flywing ACE Scale Helicopter Flight Controller : FW-FS121

Flywing ACE Scale Helicopter Flight Controller : FW-FS121

Take Flywing Scale Flight to the Next Level

The H1-ACE flight controller combines the proven heritage of the H2 system with a purpose-built architecture for Flywing helicopters. A built-in M10 multi-mode GPS module, reinforced connectors, and exclusive firmware work together to deliver a remarkably stable, scale-realistic flight experience without sacrificing agility.

Flywing-Optimised Core

Developed specifically for the Flywing fleet, the H1-ACE integrates the GPS module and custom core circuitry inside the controller housing. The direct integration improves signal strength, shields the plug from damage, and keeps wiring neat for scale fuselages.

Coordinated Turn Intelligence

ACE continuously measures airspeed and automatically blends roll with yaw input, keeping the fuselage banked smoothly through every manoeuvre. Simply combine forward cyclic with rudder and the controller handles the perfect coordinated turn for authentic, graceful flight lines.

Smart Acro + Soft Take-off

Trigger Smart Acro and the helicopter enters a controlled rolling state that holds altitude and attitude with minimal stick work. Newly added soft take-off and landing curves slow the rotor response so scale machines lift and settle gently every time.

Three-Stage Response Tuning

Switch between three response levels in flight to match training, sport, or aggressive display work. Stick-controlled continuous flips, stick-free inverted manoeuvres, and automatic pitch compensation maintain confidence as you explore each mode.

Plug-and-Play Setup

Import the correct parameter set for each supported model with a single command—no manual tuning required. Compass calibration can be triggered from the transmitter, and all status feedback is available directly through the Flywing radio workflow.

Intelligent Modes & Safety

• Auto-reorient and Return-to-Home engages when voltage drops during upright flight.
• Battery protection prevents forced RTL whilst inverted, ensuring aerobatic freedom.
• Low-voltage lockout blocks arming to avoid brown-outs before spool-up.
• Support for navigation lighting systems and automatic retractable landing gear.
• Integrated M10 GPS delivers rock-solid signal quality for precise hold performance.
• 2.6 mm custom integrated port with reinforced strain relief keeps connections secure in scale fuselages.

Key Benefits

• Purpose-built for Flywing helicopters with exclusive firmware support.
• Built-in M10 GPS and custom port minimise external wiring and plug damage.
• Coordinated Turn logic creates tighter, more realistic scale manoeuvres.
• Smart Acro maintains position and height whilst performing rolls.
• Soft take-off/landing curves keep large-scale machines composed on the deck.
• Three-level response adjustment adapts instantly to pilot preference.
• Compass calibration and model presets accessible directly from the transmitter.
• Battery protection locks out arming when voltage is unsafe and shields inverted flight from forced RTL.
• Supports navigation lights and auto-retract landing gear for complete scale builds.

Technical Specifications

• Product Name : H1-ACE Flight Controller
• Dimensions : 29.6 mm × 31.3 mm (controller body)
• Weight : 58 g
• Integrated Sensors : Built-in M10 multi-mode GPS, compass, and inertial sensing
• Control Modes : Scale, Smart Acro, Soft Take-off/Land, Coordinated Turn assist
• Response Adjustment : Three-stage gain and agility switching
• Supported Accessories : Navigation lighting systems, auto-retract landing gear
• Connector : 2.6 mm custom integrated port with reinforced shell

What's Included

• H1-ACE flight controller with integrated M10 GPS module
• Wiring harness and reinforced 2.6 mm connector set
• Installation hardware
• Quick-start and parameter import guide

Compatibility

Compatible exclusively with Flywing scale helicopters including BELL-206 (two- and four-blade variants), BELL-412, EC-135, BO-105, FW450L-ACE, UH-1, and other supported Flywing airframes. Not designed for third-party helicopters or generic RC installations.