Mikado Power Backup Max, VBar Control : 05600
Benefits at a glance
- Automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)
- All voltages can be monitored separately via telemetry
- Charging currents are adjustable, both for initial charging and for topping-up during operation
- Recharges automatically and immediately whenever needed
- Companion App warns the pilot whenever the backup is used
- This unit ensures the everyday operation of your valuable models
Hardware features
- Wide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak margin
- Capacity 3 x 110 F, 40+ A peak current
- Short circuit protection
- Fast charge (adjustable) up to 2.4 A
- Charging current is ramped up slowly, to protect main power supply
- Decoupled channels for power delivery and for charging
- VLink Telemetry monitoring and control
- No r/c channel (servo connector) must be sacrificed, pass-through via main connector
- Active balancer between capacitors for low idle discharge
- Up to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully suported by companion App
- Telemetry input for other sensors or ESCs (daisy-chaining)
Specification
- Power Supply : 3-12.6 V (3s LiPo), max. 16 V
- Dimensions : approx. 66 x 55 x 19 mm (H x W x D)
- Weight : approx. 69 g including wires
- Power Rating : Capacity 3 x 110 F, 40+ A peak
Contents
- VBar Control Power Backup w/ power wire, manual
- Telemetry wire included
Update VBar NEO, install companion App on transmitter
