These are a new spec with the new CNC Machined VBar Neo Micro installed, including Pro/Rescue Software as standard
- BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly)
- Exceptional flight performance, comparable to larger 600-700 class helis
- Equally suitable for sports flying, aerobatics and 3D flying
- Wide range of head speeds, from 2,500-7000+ 1/min possible
- Lipo 3S-650 mAh battery for flight times from 4-9 min. (included)
- Dual Motor System, direct drive for main and tail rotor
- Dual ESC with metal case
- VBar NEO mini 6.4 Flybarless System with 'Anti Gravity'
- VBar NEO already set up, no setup on your own required, just bind and fly
- VBar NEO Governor with RPM telemetry
- Micro digital servos with metal gears for the swashplate
- Carbon frame and landing gear
- Aluminum rotor head and swashplate
- VTX main rotor blades
- Glass Fiber Airbrush canopy
- This LOGO 200 does not support other radio systems than VBar Control, without further adjustments.
- At your own discretion, you can use VBar Control to select a digital third party protocol as an input, and make the necessary channel adjustments.
- You then obviously also need a suitable separate third party receiver.
- Adjustments to the flight parameters can only be made with VBar Control. VBar NEO mini can not be set up via computer software.
- If set up properly, you can then fly the model with VBar's motor switch logic, three parameter banks, and use Rescue and/or Beginner mode (if installed).
- Specifications Helicopter
- Rotor diameter : 400mm
- Rotor blades : VTX 173mm (Not Carbon)
- RTF weight : approx. 310 g
- Recommended Battery : Lipo 3S-650 mAh (included)
- Length : 420mm
- Height : 135mm
- Width : 74mm
Content
- Kit : LOGO 200 Super Combo ARF
- Motors : OMPHOBBY
- ESC : OMPHOBBY
- VBar electronic : VBar NEO mini VLink 6.4
- Servos : 3 x digital micro servo w/ metal gears, OMPHOBBY
- Blades : VTX 173mm (Not Carbon)
- Tail Blades : 71mm
- Canopy : Airbrush canopy
